Onkyo DV-BD507 DVD Player User Manual


 
17
EN
CONNECTIONS
Audio signals output from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks
For the settings in the “Digital Out” to take effect, “HDMI Audio Out” should be set to “Audio Mute”. Otherwise, the
settings made in the “HDMI Audio Out” will have a priority, and the same signal as being output from the HDMI OUT
jack will be output from the AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks as well. (Except that Dolby Digital will
be output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output instead of DTS-HD.)
“Digital Out” setting
“Bitstream” “LPCM”
“BD Audio Mode”
setting
“HD Audio
Output”
“Mix Audio
Output”
“HD Audio Output” “Mix Audio Output”
Media
Audio Source Which audio format can be output depends on the compatibility of the connected
device.
BD-video
Dolby Digital
Dolby Digital Dolby Digital
Downmix 2ch PCM Downmix 2ch PCM
Dolby Digital Plus Dolby Digital
Dolby Digital
Downmix 2ch PCM
*
1
Downmix 2ch PCM
*
2
Dolby TrueHD
Dolby Digital Dolby Digital
Downmix 2ch PCM
*
3
Downmix 2ch PCM
*
4
DTS DTS DTS Downmix 2ch PCM Downmix 2ch PCM
DTS-HD DTS DTS Downmix 2ch PCM
*
5
Downmix 2ch PCM
*
6
LPCM
Downmix 2ch PCM Downmix 2ch PCM
Downmix 2ch PCM Downmix 2ch PCM
AVCHD
Dolby Digital Dolby Digital Downmix 2ch PCM
LPCM Downmix 2ch PCM Downmix 2ch PCM
DVD-
video
Dolby Digital Dolby Digital Downmix 2ch PCM
DTS DTS Downmix 2ch PCM
LPCM 2ch PCM 2ch PCM
Audio CD
/ MP3
PCM 2ch PCM 2ch PCM
DTS-CD DTS DTS Downmix 2ch PCM
*
1
Full decoded.
*
2
Only the independent substream is decoded.
*
3
Dolby TrueHD stream is decoded.
*
4
Only the Dolby Digital substream is decoded.
*
5
Full decoded.
*
6
Only the core substream is decoded.
When playing back a BD-video which only contains the primary audio, the audio output will be the same case as the
“HD Audio Output” even if the “BD Audio Mode” is set to “Mix Audio Output”.
Note
In order to output LPCM signal from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks while outputting the
HDMI audio signal, set “HDMI Audio Out” setting to “HDMI Multi(LPCM)”.