Filter
Top Products
25
EN
BASIC PLAYBACK
Inserting the SD Memory Card and Playback
1
Insert an SD Memory Card, with the
label side facing up, into the SD
CARD slot until it clicks.
If no disc is in operation, “Media Select” screen
will appear on the TV screen.
SD Memory Card
2
Use [K / L] to select "SD Card", then
press [ENTER].
The file list will appear.
3
Follow the step 2 in “Playing Back an
Audio CD or a Disc with MP3 Files”
on page 24.
Removing the SD Memory Card
1
In stop mode, push the SD Memory
Card and then slowly remove your
finger.
2
Grasp the card and pull it out from
the SD CARD slot.
This will set the unit to “Disc” mode.
Compatible Cards:
- SD Memory Card (8MB - 2GB)
- SDHC Memory Card (4GB - 8GB)
- miniSD Card (8MB - 2GB)
- microSD Card (8MB - 2GB)
• For miniSD Card and microSD Card, the adapter will
be required.
Note
• The “Media Select” screen will disappear under the
conditions listed below:
- when [RETURN] is pressed.
- when the setup menu is called up.
• Do not remove the card during its playback.
• This unit supports SD Memory Card with FAT12 /
FAT16 file system, and SDHC Memory Card with
FAT32 file system.
• Do not delete the folders or files in the SD Memory
Card with your computer. This unit might not read
the SD Memory Card.
• This unit recognizes up to 8 characters (including
“~1”) of file name in the SD Memory Card. Characters
after 8th will not be displayed.
Reading the SD Memory Card
AVCHD
MP3
You can play back the AVCHD/MP3 files in an SD Memory
Card. With the SD Memory Card, you can also enjoy the
special additional contents for BD-ROM ver. 2 (Profile 2.0/
Profile 1.1) which can be downloaded from the Internet.
You can store the contents on an SD Memory Card via
computer and play them back with the BD-video. For more
information about the special additional contents, please
refer to the instruction book that came with the disc.
■ Setting the media mode
1
In stop mode, press [SETUP].
2
Use [ K / L ] to select
, then press
[ENTER].
Media Select Disc
HDMI Audio Out HDMI Multi (Normal)
HDMI Video Resolution Auto
Component Output 480i
Player Menu English
Quick
3
Use [ K / L ] to select “Media Select”
setting.
4
Press [ENTER] repeatedly to select
“SD Card”.
Quick
Media Select SD Card
HDMI Audio Out HDMI Multi (Normal)
HDMI Video Resolution Auto
Component Output 480i
Player Menu English
• This will set the unit to “SD Card” mode. To
play back the contents in any discs, exit “SD
Card” mode by selecting “Disc”.
5
Press [SETUP] to exit.