63
One-touch timer recording
Recording
Changing the SETUP menu
Playing discs VCR functions
Before you start
Connections Getting started
Recording Editing Others
Español
Note : Automatic Turn Off
• The remaining recording time
will appear on the display
panel during an OTR. Press
DISPLAY button to see it on
the TV screen.
•You cannot pause an OTR.
• The unit will turn off auto-
matically under the conditions
following.
1)No space remained on the
disc.
2)When a power failure
occurs.
• If OTR is finished in DVD
during playback or REC mode
in VCR, the DVD will be in
STOP mode and the VCR
keeps the current mode.
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc you
are recording onto has enough
space for the time you set.
When the recording finishes the
recorder automatically goes into
standby.
First:
1
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the DVD/VCR.
2
Select a recording speed
using REC SPEED button.
Refer to "Recording speed" on
page
56.
3
Make sure that the recording
format is set to the desired
mode.
Refer to "Formatting a disc" on
pages 58-60.
When a DVD-RW disc is
loaded:
Yo u can choose Video mode or
VR mode from SETUP menu.
"Video mode" has been selected
as the default. Refer to "Choosing
the recording format of a blank
disc" on pages
58-59.
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
4
Select a desired channel to
record using CH
K / L but-
tons or number buttons.
5
Press REC/OTR button, then
press REC/OTR button
repeatedly until a desired
recording length (
30 minutes
to 8 hours) appears on the TV
screen.
Recording will start.
When reaches the specified time,
the unit will be turned off auto-
matically.
To cancel the one-touch timer
recording within the specified
time, press STOP C button.
This operation may take a
few minutes to complete.
TIMER PROG.
