Recording from an external source
1. Turn the TV and the DVD/VCR on, and be sure to select the
input of the TV to which the DVD/VCR is connected.
2. When you want to record to a disc: Press:
Press OPEN/CLOSE
A button to open the disc tray, then
place the disc to record onto, then press open/close again.
When y
ou want to record to a tape: Press:
Insert the tape with a safety tab into the cassette compart-
ment.
3. Select the input (L1 or L2) to which the external equipment
is connected.
•To use the input jacks on the back of this unit, select “L1” position by
pressing [
0],[0],[1] on the remote control or the CH K / L buttons.
•To use the input jacks on the front of this unit, select “L2” position
by pressing [
0],[0],[2] on the remote control or the CH K / L but-
tons.
4. Select a recording speed using REC SPEED button.
Refer to
“Recording speed” on page
56 for DVD or page 50 for VCR.
5.Press REC/OTR button on the DVD/VCR to start recording.
6.Press PLAY button on the external source that you are
recording from.
7.For disc:
Press STOP C button on the DVD/VCR to stop recording.
For tape:
Press STOP/EJECT CAbutton on the unit to stop record-
ing.
This operation may take a few minutes to complete.
