Filter
Top Products
28
Setup Menus
BASIC menu
The underlining denotes the factory mode setting.
<Note>
If the DATA+ button or DATA– button is pressed with the MODE button held down when the CHARA H-
POS and CHARA V-POS items are being set, the counter display appears temporarily, and the positions
can be set while the actual status is monitored.
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
000 SUPER
0000
0001
OFF
ON
For setting whether to show the superimposed display from the MONITOR
OUT connector.
0: The superimposed display is not shown.
1: The superimposed displayed is shown.
002 CHARA H-POS 0000
0001
0003
0007
0
1
4
9
For setting the horizontal position of the superimposed characters.
(10 steps)
001 DISPLAY SEL
0000
0001
0002
0003
TIME
T&STA
T&R
T&S&R
For setting what is to be shown by the superimposed display from the
MONITOR OUT connector.
0: Only the time is displayed.
1: The time and operation mode are displayed.
2: The time and remaining tape amount are displayed.
3: The time, operation mode and remaining tape amount are displayed.
003 CHARA V-POS 0000
0001
0003
0007
0
1
3
22
For setting the vertical position of the superimposed characters.
(23 steps)
004 CHARA TYPE
0000
0001
WHITE
W/OUT
For selecting the type of characters for the superimposed and menu
displays.
0: White characters on a black background
1: White characters with black outlines