Filter
Top Products
64
RS-232C
$
Communication control commands
Sends data of computer Return data from VTR Description of command
[STX] RAN [ETX] [STX] RAN [ETX] Enables the return of the ACK (Acknowledge) code.
<Note>
This command is ignored while a search control command
is being processed.
[STX] RAF [ETX] [STX] RAF [ETX] Disables the return of the ACK (Acknowledge) code.
<Note>
This command is ignored while a search control command
is being processed.
[STX] RCK [ETX] [STX] RCK [ETX] Checks whether communication is established.
<Note>
This command is ignored while a search control command
is being processed.
[STX] RSE:m [ETX]
Parameters
m =
0: Normal
1: No completion command
2: No completion command/No
error
[STX] RSE [ETX] Sets the send timing and enable or disable for sending the
search completion command.
O
Parameter setting: normal
When search is commenced:
ACK code is returned.
When search is completed:
[STX]
(((
[ETX] is returned.
When search is aborted:
[STX] ER
(((
[ETX] is returned.
O
Parameter setting: no completion command
When search is commenced:
ACK code is returned, and then [STX]
(((
[ETX] is
returned.
When search is completed:
No return.
When search is aborted:
[STX] ER
(((
[ETX] is returned.
O
Parameter setting: no completion command/no error
When search is commenced:
ACK code is returned, and then [STX]
(((
[ETX] is
returned.
When search is completed:
No return.
When search is aborted:
No return.
<Note>
This command is ignored while a search control command
is being processed.