Filter
Top Products
12
Connecting and Setting up (continued)
Auto Setup
Auto Setup automatically tunes all available stations.
1 Press [DVD, Í] (1) to switch the unit on.
DMR-E51GCS: Auto-Setup screen appears on the television
and go to step 3.
DMR-E50GN: The Country setting menu appears on the
television.
2 Use [3, 4, 2, 1] (10) to select the country and
press [ENTER] (10).
3 Auto Setup starts.
≥This takes about 5 minutes.
To cancel Auto Setup before it finishes
Press [RETURN] (23).
The clock setting menu appears after Auto Setup
finishes
(1) Use [3, 4, 2, 1] (10) to set the correct time and date.
(2) Press [ENTER] (10) to conclude the setting.
To confirm that stations have been tuned correctly
See page 56.
When no stations have been set, confirm all
connections and restart Auto Setup
See page 57 and Hint below.
When station names or channel numbers have not
been set correctly
See page 56.
Hint
≥You can restart the Auto Setup if the screen of the unit’s tuner is
displayed in the stop mode. Hold down [W, CH] (18) and [X, CH]
(18) on the main unit simultaneously for about 5 seconds.
ENTER
RETURN
SELECT
RETURN : leave ENTER : access
Country
Australia
Others
New Zealand
Auto-Setup
RETURN
Auto-Setup in progress, please wait.
RETURN: to abort
128
Selecting TV screen type
The aspect ratio is factory set to 4:3 for a regular television. You do
not have to change this setting if you have a regular 4:3 aspect
television.
Preparation
≥Turn on the television and select the appropriate video input to
suit the connections to this unit.
≥Switch [DVD, TV] (15) to “DVD”.
1 Press [DVD, Í] (1) to turn this unit on.
2 Press [FUNCTIONS] (11) to show the FUNCTIONS
window.
3 Use [3, 4, 2, 1] (10) to select “SETUP” and press
[ENTER] (10).
4 Use [3, 4] (10) to select the “Connection” and
press [2] or [1] (10).
5 Use [3, 4] (10) to select “TV Aspect” and press
[ENTER] (10).
6 Use [3, 4] (10) to select the TV aspect and press
[ENTER] (10).
≥4:3 (factory setting)
≥16:9
ªTo return to the previous screen
Press [RETURN] (23).
For your reference
Apart from “TV Aspect”, other settings also affect how video
appears on your television. Check the following if video doesn’t
appear correctly on your television.
≥“Connection”—“Norm (4:3) TV Settings (DVD-RAM)” or “Norm
(4:3) TV Settings (DVD-Video)” (page 53).
≥The video setting on the disc. How video appears is often
specified by the disc itself.
≥The video settings on your television.
N
S
N
S
Disc Protection
DIRECT NAVIGATOR
CREATE PLAY LIST
PLAY LIST
TIMER RECORDING
TOP PLAY
FLEXIBLE REC
Off
Cartridge Protection
Off
FUNCTIONS
SELECT
ENTER
RETURN
DISC INFORMATION
PLAY
SETUP
DVD-RAM
Tab
SELECT
Tuning
SETUP
RETURN
Settings
Disc
Picture
Sound
Display
Connection
TV Aspect
Normal (4:3) TV
Norm (4:3) TV Settings (DVD-Video)
Norm (4:3) TV Settings (DVD-RAM)
TV System
Progressive (NTSC)
TV System
ENTER
SETUP
Settings
Disc
Picture
Sound
Display
Connection
Tuning
SELECT
ENTER
TV Aspect
RETURN
Norm (4:3)
Wide (16:9)
DVD(PAL).book 12 ページ ２００３年５月２２日 木曜日 午後１２時３分