Panasonic DMR-E51 DVD Recorder User Manual


 
28
Recording from a video cassette player
When connected to the other equipment
[RAM] [DVD-R]
You can record audio and video being played on a video cassette player or a video camera connected to the input terminals.
Preparation
Before connecting any cables, first make sure that the power for both units is off.
Then after connecting any cable, turn on the both units.
Connect the other equipment to this unit’s input terminals (page 49).
Switch [DVD, TV] (15) to “DVD”.
Insert a disc that can be recorded on.
Select the recording mode, XP, SP, LP or EP (page 19).
It is also possible to perform the flexible recording (FR) (page 20).
1 While stopped
Press [W, X, CH] (18) or [INPUT SELECT] (29) to select the input channel for the equipment you have connected.
Select AV1, AV2 or AV3.
2 Start play on the other equipment.
3 Press [¥, REC] (16) at the point you want to start recording.
ªTo skip unwanted parts
Press [;] (8) to pause recording.
Press again to restart recording.
ªTo stop recording
Press [] (7).
Note
Stop play on the other equipment as well.
For your reference
Poor video quality or colouring may indicate that the material you are recording has copy protection.
Select the TV system (PAL/NTSC) of the programme you wish to record (page 53).
Any software that has been so treated cannot be recorded using this unit.
DVD(PAL).book 28 ページ 2003年5月22日 木曜日 午後12時3分