Filter
Top Products
24
Timer recording
Using G-CODE number to make timer
recording
[RAM] [DVD-R]
Remote control only
You can easily programme the unit to make a timer recording of a
programme by entering the programme’s G-
CODE number, which
can be found in the television sections of newspapers or in
television guides. You can programme up to 16 programmes one
month in advance. Programmes for everyday or every week are
counted as one programme.
Preparation
≥Switch [DVD, TV] (15) to “DVD”.
≥Ensure that this unit’s clock is set correctly.
≥Insert a disc for recording (make sure there is enough room for
the programme you are going to record plus a little extra).
1 Press [G-Code] (2) button.
2 Press the numeric buttons (4) to enter the G-CODE
number.
≥If you enter the wrong digit, use [2] (10) to move back and
enter the correct digit.
3 Press [ENTER] (10).
≥The Timer Programme Correction screen which allows you to
confirm the programme appears and make corrections if
necessary.
≥Check the programme.
To make corrections (page 25).
To programme other recordings, repeat steps 1, 2 and 3.
4 If the programme is correct
Press [ENTER] (10).
≥The Timer Programme List screen appears.
5 Press [RETURN] (23).
ªTo put the unit on recording standby
Press [ , TIMER] (12).
Ensure “ ” lights on the unit’s display.
RETURN
No.
0:59 SP
G-Code
Remain
12:53:00 12.7 TUE
--
0 9
Enter G-Code Number by using 0-9 key.
RETURN
No.
0:59 SP
G-Code
Remain
12:53:00 12.7 TUE
--
0 9
1
1
1
1
11
11
1
SELECT
12/ 7 TUE 2:00
Stop
1:00
Start
Name
Date
1:58 SP
TIMER
RECORDING
Remain
ENTER
RETURN
Press ENTER to store new programme.
Mode
SP
CANCEL
64 ABC
Title
No.
--
0 9
12:53:00 12.7 TUE
RETURN
SELECT
OK
1:2264 ABC 12/ 7 TUE01 SP
Mode
Disc
space
Stop
1:19
StartNo.
Name
Date
1:58 SP
TIMER
RECORDING
Remain
1:19:00 12.7 TUE
ENTER
CANCEL
New Timer Programme
DVD(PAL).book 24 ページ ２００３年５月２２日 木曜日 午後１２時３分