Panasonic DMR-ES18 DVD Recorder User Manual


 
RQT9053
10
STEP 1 Connection
Before connection, turn off all equipment and read the appropriate operating instructions.
Select the connection pattern that matches your environment from patterns A-B. Confirm connections not listed below with your
dealer.
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION.
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of power, even when it is turned off.
[approx. 2 W (Power Save mode)]
When “Power Save” is set to “On”, the “Quick Start” function does not work.
Connecting a television
Connecting to a television with 21-pin Scart terminal
You can also connect with the AV1 terminal on this unit using the 21-pin Scart cable.
If your television is equipped with RGB input capability, by connecting with a fully wired 21-pin Scart cable you can see video using RGB output
on this unit.
“AV1 Output” in the Setup menu (Ô 39)
For Middle East and South Africa
VHF/UHF
RF IN
AUDIO IN
R L
VIDEO
IN
44
4
1
2
3
Television’s rear panel
This unit’s rear panel
Audio/video cable
(included)
RF coaxial cable
(included)
To the aerial
Aerial
cable
To household mains socket
(AC 220 to 240 V, 50/60 Hz)
AC mains lead (included)
Connect only after all other connections
are complete.
Use the AC mains lead that matches the
socket for the area you live in.
AC mains lead with a label is for Thailand.
AC mains lead without a label is for areas
other than Thailand.
For Saudi Arabia
For Middle East and South Africa
For Asia
Other connections (Ô 12)
Red White Yellow
Red White Yellow
Cooling fan
Required setting
RQT9053-L.book 10 ページ 2008年6月30日 月曜日 午後1時23分