Filter
Top Products
RQT9053
19
1 When this unit is on
Press [g].
The confirmation screen appears.
2 Press [w , q] to select “Stop
Recording” and press [OK].
Recording stops and the timer recording is cancelled. (Daily
and weekly timers remain and timer recording will start as
programmed.)
Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
1 Press [PROG/CHECK].
2 Press [e , r] to select the programme
and press the “Red” button.
The timer icon (Ô 18, right) disappears.
• To put the programme on recording standby again
Perform step 2 again before the programme start time to put
the programme on recording standby. Timer recording will
work only if the timer icon is displayed.
• When an inserted disc has been recorded with the signal system
different from the one set in the default TV system (Ô 39), this unit
does not enter the timer recording standby and the timer recording
will not start.
• Timer recordings are activated regardless of whether the unit is
turned on/off.
•“z” flashes on the unit’s display for about 5 seconds when the unit
cannot go to timer recording standby (e.g., a recordable disc is not
in the disc tray).
• Timer recordings begin when the set time is reached even when
recording or when playing.
• If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off automatically.
You can turn the unit off during timer recording.
• If the unit is not put in the timer recording standby mode at the last
10 minutes before the programmed timer recording starting time,
“z” flashes on the unit’s display. In this case, insert a recordable
disc to put the unit in the timer recording standby mode.
• If you are making consecutive recordings that will start one after
the other, the beginning of the later programme cannot be
recorded.
e.g., Programme1 10:00–11:00
Programme2 11:00–12:00
• If the actual broadcasting times of timer recordings overlap, the
recording that starts first always has priority, and the recording of
the later programme will start only after the first timer recording has
finished.
Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
Press [PROG/CHECK].
n To change a programme
Press [e , r] to select the programme and press [OK] (Ô 18,
step 3).
n To delete a programme
Press [e , r] to select the programme and press [DELETE ].
You can also delete a programme with the following steps
1Press [e , r] to select the programme and press [OPTION].
2Press [e , r] to select “Delete” and press [OK].
n To exit the timer recording list
Press [PROG/CHECK].
• Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
To cancel recording when recording
has already begun
To release the programme from
recording standby
Notes on timer recording
11:00
Programme2Programme1
RecordedRecorded
Not recorded
Check, change or delete a programme
Timer Off
A
CANCEL
S
SUB MENU
Timer
Recording
Remain
SAT 05.07.08 10:20:42
1:57 SP
Press OK to store new programme.
OK
RETURN
NameNo. Date
5. 7. SAT
Start
19:00
New Timer Programme
Stop
20:00
Mode
SP
Drive
space
OKARD01
Icons
Timer recording standby is activated.
This programme is currently recording.
The times overlap those in another
programme. Recording of the programme
with the later start time starts when the
earlier programme finishes recording.
You stopped a weekly or daily timer
recording. The icon disappears the next
time the timer programme starts recording.
The disc was full so the programme failed to
record.
The programme was copy-protected so it
was not recorded.
The programme did not complete recording
because the disc is dirty or some other
reason.
X
Message displayed in the “Drive space” line
OK: Displayed if the recording can fit in
the remaining space.
→ (Date): For recordings made daily or
weekly, the display will show until
when recordings can be made (up
to a maximum of one month from
the present time) based on the
time remaining on the disc.
!: It may not be possible to record
because:
• no disc is inserted
• the disc is write-protected
• there is no more space left
• the number of possible titles has
reached its maximum.
• the inserted disc has been
recorded with the signal system
different from the signal system
of TV system signal set on this
unit.
Timer recording
RQT9053-L.book 19 ページ ２００８年６月３０日 月曜日 午後１時２３分