Filter
Top Products
RQT9053
37
Changing the unit’s settings
You can change the unit’s settings using the Setup menu.
• The settings remain intact even if you switch the unit to standby.
1 While stopped
Press [FUNCTION MENU].
2 Press [e, r] to select “To Others” and
press [OK].
3 Press [e, r] to select “Setup” and
press [OK].
4 Press [e, r] to select the tab and
press [q].
5 Press [e, r] to select the menu and
press [OK].
6 Press [e, r] to select the option and
press [OK].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [EXIT].
Manual Tuning
You can add or delete channels, or change programme positions..
To delete a programme position
Press [e, r, w, q] to select a programme position and press the
“Red” button.
To add a blank programme position
Press [e, r, w, q] to select a programme position and press the
“Green” button.
To move a TV station to another programme position
1 Press [e, r, w, q] to select a programme position and press the
“Yellow” button.
2 Press [e, r, w, q] to select the new programme position to
which you want to assign the TV station and press [OK].
To change the tuning settings for individual programme position
1 Press [e, r, w, q] to select a programme position and press
[OK].
2 Press [e, r] to select an item and press [q].
Auto-Setup Restart
You can restart auto channel setting if set up (Ô 13) fails for some
reason.
When the confirmation screen appears
Press [w, q] to select “Yes” and press [OK].
You can also use the following method to restart Auto-Setup.
When the unit is on and stopped
Press and hold [2 CH] and [CH 1] on the main unit until the
Auto-Setup screen appears.
All the settings except for the ratings level, ratings password and
clock settings return to the factory preset. The timer recording
programmes are also cancelled.
Common procedures
Tuning
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
Remote Control
Clock
Power Save
Quick Start
DivX Registration
Initialize
DVD 1
Off
On
SELECT
TAB
RETURN
Tabs Menus Options
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
Manual Tuning
Auto-Setup Restart
TAB
OK
SELECT
RETURN
Manual Tuning
Pos Name
Ch
Pos Name
Ch
Delete
Add
Move
1
2
3
4
4
2
5
8
10
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
OK
RETURN
SELECT
ARD
ZDF
N3
HR3
BR3
Pos To change the programme position in which the
TV stations are assigned
Press [e, r] or numbered buttons to select the
number of the desired programme position and
press [OK].
Name To enter or change the name of a TV station
Press [e, r, w, q] to enter station name and press
[OK].
If the station name needs a blank space, select the
blank between “Z” and “ ”.
Channel To enter newly available TV stations or change
the channel number of an already tuned TV
station
Press [e, r] or the numbered buttons to enter the
channel number of the desired TV station.
Wait a few moments until the desired TV station has
been tuned.
After the desired TV station is tuned, press [OK].
Fine Tuning To obtain the best tuning condition
Press [e, r] to adjust the best tuning condition and
press [OK].
• Press [q] to return to “Auto”.
Video
System
To select the video system type
Press [e, r] to select “PAL” or “SECAM” if the
picture lacks colour, and press [OK].
•Auto
This unit automatically distinguishes PAL and
SECAM signals.
•PAL
For receiving PAL signals.
•SECAM
For receiving SECAM signals.
This setting is also available when you select the
external input channel (AV1, AV2, AV3, AV4) in
step 1 (Ô above).
In order to record properly, make the appropriate
settings to match the connected equipment.
Audio
Mode
To select the audio reception type
If sound quality is poor, press [e, r] to select
“BG”, “I” or “DK” and press [OK].
•BG
PAL B.G
•I
PAL I
•DK
PAL D.K.K1
Mono To select the type of sound to be recorded
Press [e, r] to select “On” if the stereo sound is
distorted due to inferior reception conditions, or if
you want to record the normal (mono) sound during
a stereo, bilingual or NICAM broadcast, and press
[OK].
Manual Tuning
Pos Name
Ch
Pos Name
Ch
Delete
Add
Move
1
2
3
4
4
2
5
8
10
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
OK
RETURN
SELECT
ARD
ZDF
N3
HR3
BR3
Pos
Name
Channel
Fine Tuning
RETURN : leave
Manual
Tuning
Video System
RETURN
SELECT
1
4
Auto
ARD
Auto
Audio Mode
BG
Mono
Off
DVD Management/Changing the unit’s settings
RQT9053-L.book 37 ページ ２００８年６月３０日 月曜日 午後１時２３分