Filter
Top Products
RQT9053
11
Connecting a television and VCR
Connecting to a television with 21-pin Scart terminal
You can also connect with the AV1 terminal on this unit using the 21-pin Scart cable.
If your television is equipped with RGB input capability, by connecting with a fully wired 21-pin Scart cable you can see video using RGB output
on this unit.
“AV1 Output” in the Setup menu (Ô 39)
Connecting to a VCR with 21-pin Scart terminal
You can also connect with the AV2 terminal on this unit using the 21-pin Scart cable.
“AV2 Input” in the Setup menu (Ô 39)
VHF/UHF
RF IN
VHF/UHF RF OUT
RF IN
AUDIO IN
R L
VIDEO
IN
AUDIO OUT
R L
VIDEO
OUT
1
4
2
5
3
66
6
Television’s rear panel
This unit’s rear panel
VCR’s rear panel
To the aerial
Aerial cable
Audio/video cable
RF coaxial cable
Connect the unit directly to the
television
Video signals fed through video
cassette recorders will be affected
by copyright protection systems and
the picture will not be shown
correctly on the television.
• When connecting to a television with a built-in VCR
Connect to the input terminals on the television side if
there are both television and VCR input terminals.
Television
VCR
This unit
DO NOT
Audio/video cable
(included)
RF coaxial cable
(included)
Red White Yellow
Red White Yellow
Red White Yellow
Red White Yellow
To household mains socket
(AC 220 to 240 V, 50/60 Hz)
AC mains lead (included)
Connect only after all other connections
are complete.
Use the AC mains lead that matches the
socket for the area you live in.
AC mains lead with a label is for Thailand.
AC mains lead without a label is for areas
other than Thailand.
For Saudi Arabia
For Middle East and South Africa
For Asia
Other connections (Ô 12)
Required setting
Required setting
STEP 1 Connection
RQT9053-L.book 11 ページ ２００８年６月３０日 月曜日 午後１時２３分