Filter
Top Products
Getting Started
RQTV0115
11
11
Operating the TV
Turn on the TV.
(1) TV Power button (Í)
≥Switch the TV from on to standby mode or vice versa.
On some TVs, with this button it is only possible to turn it to
standby mode (OFF). In this case, try to turn the TV on with the
following button:
[JICH] (4)
(2) TV Input Mode Selector button (AV)
≥To select the desired AV input on the TV.
(3) TV Volume Up/Down buttons (sNrVOLUME)
≥To adjust the volume of the TV.
(4) TV Channel Up/Down buttons (IJCH)
≥To select the desired programme position (TV station) on the
TV.
You can operate the TVs of the manufacturers listed below with the
remote control after setting it.
.........................................................................................................................................................................................................................
[1] Refer to the chart below for the code of your TV.
.........................................................................................................................................................................................................................
[2] Aim the remote control at the TV.
While pressing [Í] (1), use the numeric
buttons to enter the two-digit code.
Example: “1”; [0]l[1]
.........................................................................................................................................................................................................................
[3] Check whether the TV can be operated
properly.
≥Test by turning on the TV and changing channels. Repeat the
procedure until you find the code that allows correct operation.
≥When a manufacturer has multiple codes in the following chart,
try entering other codes if the TV operations cannot be
performed properly, and then select the optimal code.
Notes:
≥If you are using a Panasonic TV, this setting has already been
made, you do not need to perform the above procedure. However,
this remote control may not work on some Panasonic TVs.
≥Some TV models cannot be operated by this remote control
(including all TVs non-remote compatible).
TV OPERATION
Numeric
Buttons
(4)
(3)
(2)
(1)
TV Maker Setting
Brand Code
Panasonic/National 01-04
SONY 05
TOSHIBA 06
JVC 07
HITACHI 08
MITSUBISHI 09, 10
SHARP 11
PHILIPS, SAMSUNG 12
NEC 13
SANYO 14
GOLDSTAR/LG 15, 16
SAMSUNG 17, 18
SANYO 19
VP60GCS.book Page 11 Monday, March 6, 2006 3:23 PM