Filter
Top Products
Before Use
RQTV0115
7
7
Control Reference Guide
Operations in these instructions are described mainly for the remote control, but you can do the operations on the main unit if the
controls are the same.
ªCommon section
[A] Power button (Í/I)
≥Press [Í/I] to switch this unit from on to standby mode or vice
versa. In standby mode, the unit is still connected to the main
AC power.
[B] Infra-red Remote Control Receiver Window
[C] Display
ªVHS section
(1) Tape Eject button (<EJECT)...................................(l 14)
(2) Cassette Compartment
(3) AV2 IN (AUDIO/VIDEO) Sockets ..............................(l 17)
(4) Recording/One-Touch Recording button
(¥REC/OTR) ........................................................(l 16, 17)
(5) Timer Recording button ( TIMER REC)...............(l 18)
(6) Channel Down/Up buttons (IJCH).......... (l 12, 15, 16)
(7) ∫ Stop button ........................................................... (l 14)
(8) 1Play button............................................................ (l 14)
(9) Rewind/Fast-Forward buttons
(6 56/REW FF/5) ......................................... (l 14)
ªDVD section
(1) Disc Tray
(2) Disc Tray Open/Close button (<
OPEN/CLOSE
)...... (l 23)
(3) DVD-RAM Copying button
(DVD-RAM COPYING)............................................... (l 38)
(4) ∫ Stop button ........................................................... (l 23)
(5) 1Play button............................................................ (l 23)
(6) AV Enhancer button (AV ENHANCER)................... (l 26)
ªCommon section
[A] Counter Display
≥Current time/VHS recording and play counter/Disc play
counter/Miscellaneous messages, etc.
[B] Running Indicator
≥Lights up when the VHS or DVD section is active.
≥Flashes when the cassette is paused or the disc is stopped.
≥One bar lights up when the disc is paused.
≥The bars flash one at a time when the cassette or disc is
playing.
[C] Play Indicator
≥Lights up when playing a cassette or disc.
[D] Minus Indicator
≥Lights up when the VHS tape counter passes the zero mark on
the counter display or when the remaining time display is
selected on some discs (j 0:00).
ªVHS section
(1) Operation Status of VHS Section
≥Lights up when a cassette is inserted.
≥Flashes when recording or timer recording is
attempted with no cassette inserted.
(2) VHS Selector Indicator
≥Lights up when the VHS section is active.
(3) Timer Programme Recording Indicator
(4) Clock Indicator
≥Lights up during the clock display.
(5) Recording Indicator
≥Lights up during recording, copying or timer recording.
(6) Remaining Time Indicator (l 17)
(7) Recording Mode Indicator (l 16)
ªDVD section
(1) Operation Status of DVD Section
≥Lights up when a disc is inserted.
(2) DVD Selector Indicator
≥Lights up when the DVD section is active.
Note:
≥“ ” or “ ” indicator lights up all the time if a cassette
or CD is inserted.
Main Unit
The Unit’s Display
[A]
(2)
(5) (6)
[B] [C]
(1)(1) (4)(3)
[D]
(7)
(2)
VP60GCS.book Page 7 Monday, March 6, 2006 3:23 PM