Filter
Top Products
VHS
Operations
RQTV0115
19
19
Search Functions
This unit automatically adds special index signals on the tape when
recording starts. You can find the desired programme quickly with
these signals.
During stop or playback,
Press [:] (backward) or
[9] (forward).
≥Each press increases the number of skips.
¬ To cancel the Index Search or to stop playback
Press [∫STOP].
Notes:
≥Up to 20 index signals can be searched for from both directions.
≥If you press either one of the buttons too many times, you can
correct the number of skips by pressing the opposite button.
≥The figure on the display decreases by 1 each time an index signal
is located.
≥This feature may not work correctly if the marks are too close
together. Make recordings of at least 5 minutes.
¬ Index signals are recorded in the following cases
≥When a recording is started by pressing [¥REC].
≥When [¥REC] on the remote control is pressed during recording.
≥When timer recording is activated.
VHS Index Search System (VISS)
VP60GCS.book Page 19 Monday, March 6, 2006 3:23 PM