Filter
Top Products
Getting Started
RQTV0115
13
13
Setting Up for VHS and DVD Quick Setup
Make basic settings for VHS. These settings are retained in the
memory until they are changed, even if the unit is turned off.
≥Select the unit viewing channel (or the AV input) on the TV.
≥Turn on the unit.
≥Press [VHS SELECT] (l 8).
.........................................................................................................................................................................................................................
[1] Press [MENU].
..........................................................................................................
[2] Press [34] to select
the menu.
..........................................................................................................
[3] Press [ENTER].
Select the language for these
menus on screen displays.
..........................................................................................................
[1] Press [34] to select
the desired language.
..........................................................................................................
[2] Press [MENU] twice to
clear the on-screen
display.
The clock operates for at least 3 years on its backup system in the
event of power failure.
After 3 years, clock back up can only be guaranteed for a maximum
of 1 hour.
.........................................................................................................................................................................................................................
[1] Set each item with
[34 1].
Press [2] to return to the
previous item.
At the set time (H:M) point:
≥When [34] is kept pressed,
the indication changes in 30
minute steps.
≥There is no need to press
[34] continuously.
≥This is a 24-hour clock.
.........................................................................................................................................................................................................................
[2] Press [MENU] to start the clock and exit the
setting screen.
Make basic settings for DVD.The QUICK SETUP screen assists you
to make necessary settings such as Menu Language (l 37) and TV
Aspect (l below).
≥Select the unit viewing channel (or the AV input) on the TV.
≥Turn on the unit.
≥Press [DVD SELECT] (l 8).
.........................................................................................................................................................................................................................
[1] Press [SETUP].
..........................................................................................................
[2] Follow the messages
and make the settings
using [342 1] and
[ENTER].
¬ To change these settings later
Select “QUICK SETUP” in the “Others” tab (l 37).
¬ To return to the previous screen
Press [RETURN].
Notes:
≥The “QUICK SETUP” screen only appears by pressing [SETUP]
when the unit is turned on for the first time. If the settings are not
completed in “QUICK SETUP”, the “QUICK SETUP” screen will
appear whenever [SETUP] is pressed. To avoid the reappearance
of the “QUICK SETUP” screen, or to abort the use of “QUICK
SETUP”, select “NO” in the “Would you like to use QUICK
SETUP?” screen.
≥All settings will return to default by selecting “Re-initialise Setting”
in the “Others” tab. To reset the DVD QUICK SETUP, follow the
above steps 1 and 2.
Select “4:3” (regular) or “16:9” (widescreen) to suit your TV.
If you have a regular 4:3 TV, you can also select how video on some
discs are shown.
≥4:3 Pan & Scan (Initial Setting)
Widescreen software is expanded to fill the
screen of a 4:3 aspect TV (unless prohibited
by the producer of the disc).
≥4:3 Letterbox
Widescreen software is shown in the
letterbox style on a 4:3 aspect TV.
If you have a wide-screen TV (16:9), you can
select the style with the TV’s screen mode
function.
Common procedures
Language
Clock Set
Time Reset Function
If the clock is less than 2 minutes early or late, it can easily be
reset to the proper time.
Example: Resetting the clock to 12:00
1)
Display the “CLOCK SET” screen
.
2) When the current clock display on the unit is between
11:58 and 12:01, press [MENU] as soon as it is 12:00.
This will reset the time to 12:00.
VHS
M
ENU
CLOCK
SET
TUNE
LANGUAGE
R
PRESET
SYSTEM
OPTION
T
APE
REFRESH
SELECT : , ENTER
END :
M
E
NU
SELECT :
END :
M
E
NU
LANGUAGE
ENGL
ISH
CLOCK
SET
SELECT
Y M D H:M
2006 1 1 0:00
:
START : MENU
TV Aspect
DVD Setup
English Français
Deutsch Italiano
Espanol Portugues
QUICK SETUP
to select and press
ENTER
to
return
RETURN
Nederlands
e.g. NV-VP60 GC
4:3 Pan & Scan
4:3 Letterbox
VP60GCS.book Page 13 Monday, March 6, 2006 3:23 PM