Filter
Top Products
RQTV0115
20
20
Settings Using the On-Screen Display
Change the settings to suit your preferences and the environment in
which you are using the unit. These settings are retained in the
memory until they are changed, even if the unit is turned off.
≥Select the unit viewing channel (or the AV input) on the TV.
≥Press [VHS SELECT] (l 8).
.........................................................................................................................................................................................................................
[1] Press [MENU].
..........................................................................................................
[2] Press [34] to
select the menu.
..........................................................................................................
[3] Press [ENTER].
¬ For “LANGUAGE” (l 13)
¬ For “CLOCK SET” (l 13)
The unit tunes automatically when you plug it in and turn it on for the
first time (l 12), but you can start the process again if necessary.
≥Select any programme position except “A1”, “A2” or “dc”.
Auto tuning searches for TV stations from VHF minimum to UHF
maximum and memorizes every tuned programme position. Other
programme positions are skipped (Channel plan l below).
.........................................................................................................................................................................................................................
[1] Press [34] to select
“AUTO TUNE”.
..........................................................................................................
[2] Press [21] to start
Auto Tuning.
≥It may take up to 5 minutes
or more to complete.
≥When Auto Tuning is
completed, the on-screen
display disappears and
programme position 1 is
selected.
¬ To stop halfway through
Press [MENU].
¬ If the unit is not correctly tuned by Auto Tuning
Follow the procedure on the right (Manual Tuning).
Channel plan
.........................................................................................................................................................................................................................
[1] Press [34] to select
“CH” and then press
[21] to select the
channel.
.............................................................................................
[2] Press [34] to select
“CLEAR” and then
press [21] to select
“OFF”.
ª
To select a blank
programme,
select “ON”. If you select
“ON”, proceed to step 6.
≥To restore the channel
again, select “OFF”.
≥Repeat steps 1 and 2 for
another unoccupied
programme positions to
skip during the selection of
the programme positions.
.........................................................................................................................................................................................................................
[3] Press [34] to select “AUDIO SYSTEM” and
then press [21] to select the broadcasting
system.
BG: PAL B.G.H/SECAM B.G
I: PAL I
DK: PAL D/SECAM D.K.K1
.........................................................................................................................................................................................................................
[4] Press [34] to select “COLOUR SYSTEM” and
then press [21] to select “AUTO”.
≥The unit automatically distinguishes between PAL and SECAM
broadcasts.
≥If the picture lacks of colour when “AUTO” is selected, select
“MESECAM” or “PAL”.
.........................................................................................................................................................................................................................
[5] Press [34] to select “SEARCH” and then press
[21] to start Manual Tuning.
≥If the desired TV station has not been tuned, press [21]
again.
≥Press [MENU] and repeat steps 1-5 for each programme
position you want to tune to a station.
≥You can also set the programme position directly by entering
the number with the numeric buttons (l below).
.........................................................................................................................................................................................................................
[6] Press [MENU] repeatedly until the setting
screen disappears.
Common procedures
Tuner Preset
Auto Tuning
SYSTEM VHF UHF CATV
B
G
CCIR Standard
(B.G.H)
E2-E12 E21-E69
S01-S05
M1-M10
U1-U10
S21-S41
I
Hong Kong
Special
Administrative
Region of China,
UK (I)
s E21-E69 s
D
K
East Europe
(D.K.K1)
R1-R12 E21-E69 44-470 MHz
China (D) C1-C12 C13-C57 Z1-Z35
VHS
M
ENU
CLOCK
SET
TUNE
LANGUAGE
R
PRESET
SYSTEM
OPTION
T
APE
REFRESH
SELECT : , ENTER
END :
M
E
NU
CH 1
SEARCH
100
END : MENU
TUNER PRESET
END :MENU
CH 1
CLEAR
[OFF]
AUDIO SYSTE
M
[BG]
COLOUR
SYSTEM [AUTO]
AUTO
T
UNE
SEARCH
[3 ]
FINE
The number of channels still to be
auto tuned.
Manual Tuning
Direct Tuning
After you select “SEARCH”, press the numeric buttons to
select the programme position.
≥Repeat the steps above for other channels that require tuning.
CH
2
SEARCH
END : MEN U
74
CH
2
SEARCH
END : MENU
TUNER PRESET
CH
2
CLEAR
[OFF]
AUDIO SYSTE
M
[BG]
COLOUR
SYSTEM [AUT
O
]
AUTO
T
UNE
SEARCH
[ 3]
FINE
VP60GCS.book Page 20 Monday, March 6, 2006 3:23 PM