Filter
Top Products
RQTV0115
17
Recording
VHS
Operations
17
You can start recording quickly and set a duration.
During recording, press [¥REC/OTR] on the unit
repeatedly.
Select the desired recording duration.
≥Each time you press the button, the indication on the unit’s display
changes as follows:
Counter display (normal recording mode) > 30 (min) >
60 (min) > 90 (min) > 120 (min) > 180 (min) >
240 (min) > Current time (normal recording mode)
≥The unit will automatically switch off when OTR is completed.
¬ To stop OTR at any time
Press [∫STOP] or [Í/I] (ÍVHS).
Notes:
≥The OTR function works during normal recording only.
≥When the tape reaches its end during OTR, the unit will turn itself
off.
You can record from other video sources (VHS, camera, etc.).
≥Connect the other equipment to this unit as shown. If audio output
on the other equipment is monaural, use a stereo-monaural
conversion cable (not supplied).
≥Insert a recorded video cassette with an intact erasure prevention
tab.
≥Set A1 or A2 with [INPUT SEL] to select the audio/video source
required.
.........................................................................................................................................................................................................................
[1] Press [1PLAY].
Find the recording start
point.
.............................................................................................
[2] Press [;/DPAUSE],
then press [¥REC].
Put the unit in recording
standby mode.
.............................................................................................
[3] Start play on the
other equipment.
.............................................................................................
[4] Press [;/DPAUSE]
to start recording.
¬ To stop recording
Press [∫STOP].
You can delete all the contents of a video cassette (the picture and
sound data).
.........................................................................................................................................................................................................................
[1] Insert the cassette
that you want to
refresh and press
[MENU].
.............................................................................................
[2] Press [34] to
select “TAPE
REFRESH” and then
press [ENTER].
.............................................................................................
[3] Press [ENTER] for
2 seconds or more
to start the tape
refresh function.
The tape refresh function
starts.
≥The tape is rewound to the
beginning and is then
erased as it is fast-
forwarded.
≥When the end of the video
cassette is reached, the
unit automatically rewinds it
to the beginning.
Note:
≥When a video cassette with a broken erasure prevention tab is
inserted, this function is not activated.
One-Touch Recording (OTR)
Recording from an External Source
STOP
REC/OTR
AUDIO
OUT
LR
VIDEO
OUT
AV2 IN (AUDIO/VIDEO)
AV1 IN (AUDIO/VIDEO)
Other VHS or Video
movie camera
(Not supplied)
Tape Refresh
VHS
M
ENU
CLOCK
SET
TUNE
LANGUAGE
R
PRESET
SYSTEM
OPTION
T
APE
REFRESH
SELECT : , ENTER
END :
M
E
NU
VP60GCS.book Page 17 Monday, March 6, 2006 3:23 PM