Panasonic NV-VP60 Series DVD VCR Combo User Manual


 
RQTV0115
16
16
Recording
Select the unit viewing channel (or the AV input) on the TV.
Press [VHS SELECT] (l 8).
Check that the clock is set to the correct time. If it has not been set,
refer to page 13.
.........................................................................................................................................................................................................................
[1] Insert a video cassette with an
intact erasure prevention tab.
.........................................................................................................................................................................................................................
[2] Press [JCH] or [ICH] to select
the TV station.
If you keep pressing these buttons, the
channels changes quickly.
You can also select the channels with the numeric buttons.
Example: “5”; [5]
“15”; [– /– –]l[1]l[5]
.........................................................................................................................................................................................................................
[3] Press [REC MODE] to select the
recording mode.
Each time you press the button:
SP>LP>EP>SP
.........................................................................................................................................................................................................................
[4] Press [¥REC] to start recording.
¬ To stop recording
Press [STOP].
¬ To interrupt recording
Press [;/DPAUSE] during recording. Press it again to continue
recording.
Notes:
Even if the video cassette you use is labeled “S-VHS”, it is not
possible to record in the S-VHS with this unit. It records in VHS.
You cannot change channels while recording. You can change
channels while the recording is paused.
When the recording is paused for more than 5 minutes, the unit
returns to stop mode.
You can watch another TV programme or play discs while recording.
The recording will not be affected.
ªTV
1) Press [JCH] or [ICH] to select the desired TV programme.
ªDVD
1) While recording, press [DVD SELECT].
2) Insert the disc and press [1PLAY] to start play.
(l 23)
Recording mode
SP: Provides standard recording time with optimum picture
and sound quality.
LP: Provides double recording time with slightly reduced
picture and sound quality.
EP: Provides triple recording time with slightly reduced picture
and sound quality.
When you playback a video cassette recorded in EP mode,
the monaural sound may be unstable.
When you start the recording in EP mode, the “EP” indication
on the unit’s display flashes for about 8 seconds.
Using another device while recording
VP60GCS.book Page 16 Monday, March 6, 2006 3:23 PM