Filter
Top Products
RQT8317
13
You can operate the TV through the unit’s remote control.
Point the remote control at the television
While pressing [^ TV], enter the code with
the numbered buttons.
e.g., 01: [0] Ô [1]
Manufacturer and Code No.
Test by turning on the television and changing channels. Repeat the
procedure until you find the code that allows correct operation.
• If your television brand is not listed or if the code listed for your
television does not allow control of your television, this remote
control is not compatible with your television.
When other Panasonic products placed nearby respond to this unit’s
remote control, change the remote control code on the main unit and
the remote control (the two must match).
Under normal circumstances use the factory set code “DVD 1”.
To change the code on the main unit
1 While stopped
Press [FUNCTIONS].
2 Press [e,r] to select “To Others” and
press [ENTER].
3 Press [e,r] to select “Setup” and
press [ENTER].
4 Press [e,r] to select “Others” and
press [q].
5 Press [e,r] to select “Remote
Control” and press [ENTER].
6 Press [e,r] to select the code
(“DVD 1”, “DVD 2” or “DVD 3”) and
press [ENTER].
To change the code on the remote control
7 While pressing [ENTER], press and
hold the numbered button ([1], [2] or
[3]) for more than 2 seconds.
8 Press [ENTER].
n When the following indicator appears on the
unit’s display
Note
Executing “Shipping Condition” in the Setup menu returns the main
unit code to “DVD 1”. Change the remote control code to 1
(Ô step 7).
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
Television operation
Brand Code Brand Code
Panasonic/National
01/02/03/
04
PHILIPS 12
GOLDSTAR/LG 15/16 SAMSUNG 12/17/18
HITACHI 08 SANYO 14/19
JVC 07 SHARP 11
MITSUBISHI 09/10 SONY 05
NEC 13 TOSHIBA 06
Input Select
Volume
Channel
Select
Turn TV on/off
When other Panasonic products
respond to this remote control
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
Remote Control
Press " " and "ENTER" together
for more than 2 seconds on the remote
control.
ENTER
RETURN
Press and hold [ENTER] and
the indicated number button at
the same time for more than
2 seconds.
Set up to match your television and remote control