Filter
Top Products
RQT8317
20
Timer recording
1 When this unit is on
Press [g].
The confirmation screen appears.
2 Press [w,q] to select “Stop
Recording” and press [ENTER].
Recording stops and the timer recording is cancelled. (Daily
and weekly timers remain and timer recording will start as
programmed.)
1 Press [PROG/CHECK].
2 Press [e,r] to select the programme
and press [A].
The timer icon (Ô page 18, 19) disappears.
• To put the programme on recording standby again
Perform step 2 again before the programme start time to put
the programme on recording standby. Timer recording will
work only if the timer icon is displayed.
•“z” flashes on the unit’s display for about 5 seconds when the unit
cannot go to timer recording standby (e.g., a recordable disc is not
in the disc tray).
• Timer recordings begin when the set time is reached even when
recording or when playing.
• If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off automatically.
You can turn the unit off during timer recording.
• If the unit is not put in the timer recording standby mode at the last
10 minutes before the programmed timer recording starting time,
“z” flashes on the unit’s display. In this case, insert a recordable
disc to put the unit in the timer recording standby mode.
• If you are making consecutive recordings that will start one after
the other, the beginning of the later programme cannot be
recorded.
e.g., Programme1 10:00–11:00
Programme2 11:00–12:00
• If the actual broadcasting times of timer recordings overlap, the
recording that starts first always has priority, and the recording of
the later programme will start only after the first timer recording has
finished.
e,r,w,q
ENTER
g
PROG/CHECK
A
e.g.,
Australia and N.Z.
To cancel recording when recording
has already begun
To release the programme from
recording standby
Notes on timer recording
11:00
Programme2Programme1
RecordedRecorded
Not recorded