Filter
Top Products
RQT8317
43
You can restart auto channel setting if the channel reception setting
(Ô page 11) fails for some reason.
After performing steps 1–4 (Ô page 42)
5 Press [e,r] to select “Auto-Setup
Restart” and press [ENTER].
The confirmation screen appears.
6 Press [w,q] to select “Yes” and
press [ENTER].
• If the Country setting menu appears on the television
Press [e,r] to select the country and press [ENTER].
You can also use the following method to restart Auto-Setup.
When the unit is on and stopped
Press and hold [2 CH] and [CH 1] on the main unit until the
Country setting screen or the Auto-Setup screen appears.
• All the settings except for the ratings level, ratings password and
time settings return to the factory preset. The timer recording
programmes are also cancelled.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
List of TV Reception Channels
TV System
Refer to the control reference on page 38.
Change this setting if you connect an NTSC television or to record
NTSC video from another source.
1 While stopped
Press [FUNCTIONS].
2 Press [e,r] to select “To Others” and
press [ENTER].
3 Press [e,r] to select “Setup” and
press [ENTER].
4 Press [e,r] to select “Connection”
and press [q].
5 Press [e,r] to select “TV System”
and press [ENTER].
6 Press [e,r] to select the TV system
and press [ENTER].
• PAL (factory preset)
–Select when connecting to a PAL or Multi-system
television. Programmes recorded using NTSC are played
as PAL 60.
–Select to record television programmes and PAL input from
other equipment.
•NTSC
–Select when connecting to an NTSC television. Television
programmes cannot be recorded properly.
–Select to record NTSC input from other equipment.
The confirmation screen appears.
7 Press [w,q] to select “Yes” and press
[ENTER].
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
n To change the setting all at once (PAL ↔ NTSC)
While stopped, press and hold [g] and [; OPEN/CLOSE] on the
main unit at the same time for about 5 seconds.
Automatic setting
Tuner
System
Channel
Coverage
VHF UHF CATV
PAL-B Australia 0-12 28-69 45 MHz–470 MHz
PAL-BG New Zealand 1-11 21-69 44 MHz–470 MHz
Tuner System
Channel
Coverage
VHF UHF CATV
PAL-D K,
SECAM-DKK1
OIRT R1-R12 21-69 44 MHz–470 MHz
PAL-BGH,
SECAM-BG
CCIR E2-E12 E21-E69
S01-S05
M1-M10, U1-U10
S21-S41
PAL-I
Hong
Kong
– 21-69 –
PAL-D China 1-12 13-57 Z1-Z35
Tuner System
Channel
Coverage
VHF UHF CATV
PAL-BGH,
SECAM-BG
CCIR E2-E12 E21-E69
S01-S05
M1-M10, U1-U10
S21-S41
For Australia and N.Z.
For Australia and N.Z.
For Asia
For Middle East and South Africa
Setup
Tuning
Disc
Picture
TV System
PAL
NTSC
Resetting channel setting/TV System