Filter
Top Products
RQT8317
46
Frequently asked questions
Set up Page
What equipment is necessary to play multi
channel surround sound?
• DVD-Video:
You can play DVD-Video multi channel surround by digitally connecting an
amplifier equipped with a Dolby Digital, DTS or MPEG decoder.
• DVD-Audio:
This unit plays DVD-Audio in 2 channels. You cannot play multi channel
surround sound.
10
—
Are the headphones and speakers directly
connected to the unit?
• You cannot directly connect to the unit. Connect through the amplifier etc. 10
The television has both S VIDEO IN terminal
and COMPONENT VIDEO IN terminals.
Which terminal should I connect with?
• Connecting with the COMPONENT VIDEO OUT terminals provides a more
vivid picture compared to connecting with the S VIDEO OUT terminal.
If you have an LCD/plasma television or LCD projector compatible with
progressive scan, connect through the COMPONENT VIDEO terminals for
high-quality progressive video.
If you have a CRT television or a multi system television using PAL mode that
is compatible with progressive scan, we cannot recommend progressive
output as some flickering can occur.
10
Is my television progressive output
compatible?
• All Panasonic televisions that have 625 (576)/50i · 50p, 525 (480)/60i · 60p
input terminals are compatible. Consult the manufacturer if you have another
brand of television.
—
Disc
Can DVD-R, DVD-R DL, DVD-RW (DVD-
Video Format), +R, +R DL and +RW
recorded on this unit be played on other
equipment?
• You can play on compatible equipment such as DVD players after finalizing the
disc on this unit. It is not necessary to finalize +RW. However depending on
the condition of the recording, the quality of the disc and capabilities of the
DVD player, play may not be possible.
37
Can I play DVD-Video, DVD-Audio and Video
CDs bought in another country?
• You cannot play DVD-Video if their region number is not supported by this unit.
Refer to the disc’s jacket for more information.
Cover
Can a DVD-Video that does not have a
region number be played?
• The DVD-Video region number indicates the disc conforms to a standard. You
cannot play discs that do not have a region number.
—
Please tell me about DVD-R, DVD-R DL,
DVD-RW, +R, +R DL and +RW compatibility
with this unit.
• This unit records and plays DVD-R, DVD-R DL, DVD-RW (DVD-Video format),
+R, +R DL and +RW, and plays DVD-RW (VR format).
• This unit also records and plays high speed recording compatible discs.
• After recording but before finalizing +R, +R DL discs
–You may not be able to play and record discs on this unit after recording
them on other Panasonic products or other manufacturer’s equipment.
–You may not be able to play and record discs on other equipment after
recording them on this unit.
After finalizing the disc, you will be able to play it on any DVD-Video
compatible player.
4, 5
—
—
Please tell me about CD-R and CD-RW
compatibility with this unit.
• This unit plays CD-R/CD-RW discs (audio recording discs) which have been
recorded under one of the following standards: CD-DA, Video CD, MP3, DivX
and still pictures (JPEG/TIFF).
Close the session after recording.
• You cannot write to a CD-R or CD-RW with this unit.
5, 26
—
Recording
Can I record from a commercially purchased
video cassette or DVD?
• Most commercially sold video cassettes and DVD are copy protected;
therefore, recording is usually not possible.
—
Can I record digital audio signals using this
unit?
• You cannot record digital signals. The digital audio terminals on this unit are
for output only. (The audio recorded using the unit’s DV IN terminal from a
digital video camcorder, for example, is recorded digitally.)
—
Can a digital audio signal from this unit be
recorded to other equipment?
• You can record if using the PCM signal. When recording DVD, change the
“Digital Audio Output” settings to the following from the Setup menu.
–PCM Down Conversion: On
–Dolby Digital/DTS/MPEG: PCM
However, only
–As long as digital recording from the disc is permitted.
–As long as the recording equipment is compatible with a sampling frequency
of 48 kHz.
• You cannot record MP3 signals.
40
—
Can I switch to bilingual broadcast during
recording?
• With DVD-RAM, you can. Just press [AUDIO]. This does not affect the actual
recording of the audio.
• With DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or +RW,
you cannot.
—
—