Filter
Top Products
RQT8317
21
Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
n To change a programme
Press [e,r] to select the programme and press [ENTER]. (Ô page 19, Manually programming timer recordings, step 3)
n To delete a programme
Press [e,r] to select the programme and press [ ].
n To exit the timer recording list
Press [PROG/CHECK].
• Programmes that failed to record are deleted from the timer recording list at 4 a.m. two days later.
Check, change or delete a programme
Timer Off
A
CANCEL
S
SUB MENU
Timer
Recording
Remain
8:17:23 7. 5. SUN
1:57 SP
Press ENTER to store new programme.
ENTER
RETURN
NameNo. Date
7. 5. SUN
Start
19:00
New Timer Programme
Stop
20:00
Mode
SP
Drive
space
OKARD01
Icons
Timer recording standby is activated.
This programme is currently recording.
The times overlap those in another
programme. Recording of the programme
with the later start time starts when the
earlier programme finishes recording.
You stopped a weekly or daily timer
recording. The icon disappears the next
time the timer programme starts recording.
The disc was full so the programme failed to
record.
The material was copy-protected so it was
not recorded.
The programme did not complete recording
because the disc is dirty or some other
reason.
W
F
X
Message displayed in the “Drive space” line
OK: Displayed if the recording can fit in
the remaining space.
→ (Date): For recordings made daily or
weekly, the display will show until
when recordings can be made (up
to a maximum of one month from
the present time) based on the
time remaining on the disc.
!: It may not be possible to record
because:
• no disc is inserted
• the disc is write-protected
• there is no more space left
• the number of possible titles has
reached its maximum.
Timer recording