RQT8317
36
DVD Management
Preparation
•
Release protection (Ô below).
1 While stopped
Press [FUNCTIONS].
2 Press [e,r] to select “To Others” and
press [ENTER].
3 Press [e,r] to select “DVD
Management” and press [ENTER].
Select which step 4 to perform depending on what you want to
do next.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
After performing steps 1–3 (Ô above)
4 Press [e,r] to select “Disc Name”
and press [ENTER].
Ô page 35, Entering text
• The disc name is displayed in the DVD Management
window.
• With a finalized disc and +RW, the name is displayed on the
Top Menu.
After performing steps 1–3 (Ô above)
4 Press [e,r] to select “Disc
Protection” and press [ENTER].
5 Press [w,q] to select “Yes” and press
[ENTER].
The lock symbol appears closed when the disc is write-
protected.
(with a cartridge)
With the write-protect tab in the protect position, play
automatically starts when inserted in the unit.
After performing steps 1–3 (Ô left)
4 Press [e,r] to select “Delete all titles”
and press [ENTER].
5 Press [w,q] to select “Yes” and press
[ENTER].
6 Press [w,q] to select “Start” and
press [ENTER].
A message appears when finished.
7 Press [ENTER].
Note
• Once deleted, the recorded contents are lost and cannot be
restored. Make certain before proceeding.
• Deleting all video titles will result in all playlists also being deleted.
• Delete does not work if one or more titles are protected.
(New disc only)
Note
After performing steps 1–3 (Ô left)
4 Press [e,r] to select “Format Disc”
and press [ENTER].
5 Press [w,q] to select “Yes” and press
[ENTER].
6 Press [w,q] to select “Start” and
press [ENTER].
A message appears when formatting is finished.
• Do not disconnect the AC mains lead while formatting.
This can render the disc unusable.
• Formatting normally takes a few minutes, however it may
take up to a maximum of 70 minutes ( ).
7 Press [ENTER].
Note
• Formatting cannot be performed on the disc.
• You can format only as DVD-Video format on this
unit.
• When a disc has been formatted using this unit, it may not be
possible to use it on any other equipment.
To stop formatting
Press [RETURN].
• You can cancel formatting if it takes more than 2 minutes. The disc
must be reformatted if you do this.
Common procedures
Providing a name for a disc
Setting the protection
Cartridge–protection
RETURN
e,r,w,q
ENTER
FUNCTIONS
RAM
RAM -R -R DL -RW(V) +R +R DL +RW
Disc Name
Disc Protection
DVD
Management
DVD-RAM
DOCUMENTARY
Titles
Used
11
0:22
Rema
My favorite
01
Chapter 1
RAM
Disc Name
Disc Protection
Delete all titles
Off
DVD
Management
DVD-RAM
Titles
Used
11
0:03
Remain 1:57(SP)
RAM
PROTECT
Deleting all titles and playlists
–Delete all titles
Deleting all the contents of a disc
–Format Disc
Formatting deletes all contents (including computer data),
and they cannot be restored. Check carefully before
proceeding. The contents are deleted when you format it even if
you have set protection.
RAM
RAM -RW(V) +RW -RW(VR)
+R +R DL
Note
RAM
-R -R DL
CD
-RW(V) -RW(VR)
RAM