RQT8317
9
Connecting a television and VCR
Connecting to a television with 21-pin Scart terminal
You can also connect with the AV1 terminal on this unit using the 21-pin Scart cable.
If your television is equipped with RGB input capability, by connecting with a fully wired 21-pin Scart cable you can see video using RGB output
on this unit.
“AV1 Output” in the Setup menu (Ô page 40)
Connecting to a VCR with 21-pin Scart terminal
You can also connect with the AV2 terminal on this unit using the 21-pin Scart cable.
“AV2 Input” in the Setup menu (Ô page 40)
VHF/UHF
RF IN
VHF/UHF RF OUT
RF IN
AUDIO IN
R L
VIDEO
IN
AUDIO OUT
R L
VIDEO
OUT
1
4
2
5
3
66
6
Television’s rear panel
This unit’s rear panel
VCR’s rear panel
To the aerial
Aerial cable
Audio/Video cable
RF coaxial cable
(included)
Connect the unit directly to the television
Video signals fed through video cassette recorders will
be affected by copyright protection systems and the
picture will not be shown correctly on the television.
Tel evisio n
This unit
VCR
Tel evisio n
VCR
This unit
Audio/Video cable
(included)
RF coaxial cable
(included)
Red White Yellow
Red White Yellow
Red White Yellow
Red White Yellow
To household mains socket
(AC 220 to 240 V, 50 Hz)
(AC 220 to 240 V, 50/60 Hz)
For Australia and N.Z.
For Asia, Middle East
and South Africa
AC mains lead (included)
Connect only after all other connections
are complete.
• Use the AC mains lead that matches the
socket for the area you live in.
For Middle East and South Africa
For Saudi Arabia
Other connections (Ô page 10)
Required setting
Required setting
STEP 1 Connection