Filter
Top Products
AV2 / 4 IN
Y
MONO
MONITOR
OUT
AV1 IN
COMPONENT
VIDEO
COMPONENT
S VIDEO
MONO MONO MONO
VIDEO
Y
L
R
AUDIO
Y
P
B
/C
B
P
R
/C
R
P
B
/C
B
P
R
/C
R
L
R
AUDIO
AV2 IN AV4 IN
AV IN
L
R
AUDIO
IN
VIDEO
OUT
AUDIO
OUT
Y, P
B, PR,
OUT
PR
PB
Y
L
R
COMPONENT VIDEO OUT
PB/CB
PR/CR
MONITOR
OUT
AV1 IN
COMPONENT
VIDEO
COMPONENT
S VIDEO
MONO MONO MONO
VIDEO
Y
L
R
AUDIO
Y
P
B
/C
B
P
R
/C
R
P
B
/C
B
P
R
/C
R
L
R
AUDIO
AV2 IN AV4 IN
L
R
AUDIO
IN
AV IN
HDMI
OUT
HDMI IN
11
Note:
Component input terminals accept progressive or non-progressive signals format, as well as high defi nition 720p(50Hz),
720p(60Hz), 1080i(50Hz) and 1080i(60Hz).
How to connect the AV2 / AV4 Component Input terminals
Example of input signal source
Connect the VIDEO or COMPONENT
VIDEO terminal.
DVD PLAYER
Digital TV-SET-TOP-BOX
(DTV-STB)
Connections
HDMI (High Defi nition Multi media Interface) is the fi rst all-digital consumer electronics A/V interface that supports
uncompressed standard. The HDMI terminal supports both video and audio information.
An HDMI-compliant device
∗
1
, such as a Set Top Box or DVD player with HDMI or DVI output terminal can be connected
to the HDMI input terminal.
• If the external device has DVI output only, use a DVI to HDMI adapter cable
∗
2
to connect to the HDMI terminal.
• Connect the audio cables to the AUDIO IN terminals when using a DVI to HDMI adapter cable.
• Select the audio setting in HDMI input. See page 20.
Notes:
• This input terminal is not intended for use with computers.
• 720p/1080i signals will be re-formatted to view on your display.
• If the external devices have the aspect adjustment, set to 16:9.
• For applicable HDMI signals information see page 41.
How to connect the HDMI Input terminal
Compatible sampling frequency of AUDIO signal through HDMI (L.PCM) : 48 kHz / 44.1 kHz / 32 kHz
Notes:
• This HDMI connecter is Type A.
• If you connect equipment without a digital output terminal, connect to the COMPONENT, S VIDEO or VIDEO input
terminal on the TV so you can receive an analogue signal.
• The HDMI IN terminal can only be used with 480i, 480p, 576i, 576p, 720p or 1080i picture signals. Set the Digital
Set Top Box DIGITAL OUT terminal output setting to 480i, 480p, 576i, 576p, 720p or 1080i. For detailed information,
refer to the Digital Set Top Box instruction manual. If you cannot display the picture because your Digital Set Top
Box does not have a DIGITAL OUT terminal output setting, use the component input (or the S Video input or Video
input). In this case the picture will be displayed as an analogue signal.
∗1. HDMI-compliant device is that has the HDMI Logo on it.
∗2. HDMI-DVI adapter cable: Consult your consumer electronics dealer for availability.
DVD PLAYER
Digital TV-SET-TOP-BOX
(DTV-STB)
Example of input signal source