Filter
Top Products
19
Picture menu
MENU
Press the MENU button.
Move to choose Picture menu.
Access Picture menu.
Move to choose menu option.
Adjust chosen option or access chosen menu.
Press the EXIT button at any time to go back to watching TV.
TV
123
456
789
0
OK
EXIT
Main menu
Picture menu
Setup menu
Sound menu
Menu Menu mode will be memorized for each TV, AV1, AV2, AV3,
AV4, PC, HDMI and Card operations mode.
Dynamic / Standard / Cinema / Auto
You can change the level of each Item (Contrast,
Brightness, Colour, Sharpness, NTSC-Tint, Colour
temperature, Colour management, D.PNR, MPEG NR and
3D-COMB) for each Menu (Dynamic, Standard, Cinema and
Auto) according to your personal preference.
Contrast, Brightness, Colour, Sharpness
Increase or decrease the levels of these options according
to your personal preference.
NTSC-Tint (Tint) The picture hue can be adjusted to suit your taste.
Notes:
• When the TV is receiving NTSC signals, NTSC-Tint is
displayed and level adjustment is possible.
• When the TV is receiving YUV (60Hz) or HDMI (60Hz)
signals, Tint is displayed and level adjustment is
possible.
Colour
temperature
Allows you to set the overall colour tone of the picture.
Choose from Cool, Standard and Warm.
Colour
management
Enables vivid colour adjustment automatically.
D.PNR Reduces noise in a channel with many noises.
Off: Recommended mode when receiving a strong signal.
Strong: Applies strong noise reductions regardless of input signals.
Weak: Applies weak noise reductions regardless of input signals.
Auto: Automatically reduces unwanted picture noise.
MPEG NR Reduces MPEG noise.
Off / Strong / Mid / Weak
This function is effective in reducing the digital block noise when viewing DVD, VCD, SD card or
digital broadcasting. The effect will be changed based on the scene and image.
MPEG: Compression technology of the image signal adopted by DVD, VCD, SD card or digital
broadcasting.
3D-COMB Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen. Set 3D-
COMB to On to display sharper and more accurate colours. Displayed only when receiving PAL or
NTSC signals. Not displayed during S Video, Component, PC, HDMI input and Card operations.
Note:
By pressing the N button on the remote control while the Picture menu is displayed, the selected menu will be changed
to the Normal mode.
Normalization will not occur if the menu is not displayed when the N button is pressed.
The Normal mode is the factory preset condition. Returning to this original condition is called “Normalization”.
Menu
Contrast
Brightness
Colour
Sharpness
Colour temperature
Picture menu
Standard
3D-COMB On
D. PNR
MPEG NR
Auto
Off
Dynamic
NTSC-Tint
Colour management On