Filter
Top Products
15
TV
123
456
789
0
OK
Tuning
During TV mode
Press the MENU button.
Move to choose Setup menu.
Access Setup menu.
Move to choose Tuning menu.
Access Tuning menu.
Move to choose menu option.
Adjust chosen option or access chosen menu.
MENU
Tuning menu
OK
EXIT
Press the EXIT button at any time to go back to watching TV.
Pressing the OK button after having adjusted some features will
store the setting as the default (replacing the factory setting).
Main menu
Picture menu
Setup menu
Sound menu
Skip
Auto tuning
Manual tuning
Sound system
Colour system
Fine tuning
Sys select
Tuning menu
5.5MHz
Auto
Off
Australia
Sys select
(System Selection)
Select the system.
NZ/INDONES / Australia
SYS SELECT REGION
NZ/INDONES
Australia
New Zealand, Indonesia, etc.
Australia
Auto tuning Allows you to automatically retune the TV. Useful if you
move house and wish to retune your TV to the local stations.
See page 16.
Manual tuning Allows individual programme positions to be tuned,
manually. See page 17.
Sound system Allows you to change the sound system used for a
programme channel.
Choose the required sound system:
5.5MHz / 6.5MHz
Colour system Lets you select the correct transmission standard for the
transmission signal being received. See page 21.
Auto / PAL / NTSC 4.43 / NTSC 3.58
Fine tuning Use to make small adjustments to the tuning of an individual station (useful for example when
weather conditions are affecting reception quality of a programme).
To cancel the Fine tuning, tune again by Manual tuning.
Skip It is possible to skip Programme Number on which no TV stations are tuned appearing on the
screen. The function is only effective when pressing the Programme Number up or down button
either on the TV set or on the remote control. Under the normal viewing, select the Programme
Number you would like to skip. Then, access Tuning menu and set Skip to On.
Off timer
Ch colour set
Child lock
Side panel
Power save
Setup menu
High
Off
Teletext
TOP
Owner ID
Tuning menu
Access
Off
Off