Filter
Top Products
26
PC mode
Main menu
Picture menu
Setup menu
Sound menu
PC setup Access to adjust chosen option.
Input :
resolution
Displayed during VGA(640 × 480 dots), WVGA(852 × 480 dots), XGA(1,024 × 768 dots),
WXGA(1,366 × 768 dots) input signals.
Select WVGA or WXGA during WVGA or WXGA input signal to avoid noise.
Clock : If a periodic striped pattern (noise) occurs, carry out adjustments to reduce the noise to the
lowest level.
H-pos : Adjust the horizontal position.
V-pos : Adjust the vertical position.
Clock phase : Eliminate the fl ickering and distortion.
Carry out this adjustment after adjusting Clock.
Adjust to reduce noise to the most inconspicuous level.
Sync : H & V - To synchronize by the horizontal and vertical signals from your PC.
On G - To synchronize by the green signal form your PC (if available).
Side panel, Power save
About settings, see page 21.
H-freq. / V-freq.
If the input signal is not applicable, the characters will turn to red.
For applicable PC signals information see page 41.
Clock
Input resolution
H-pos
V-pos
Clock phase
Sync H & V
VGA
PC setup
PC setup
Side panel
Power save
Setup menu
Off
Off
Access
MENU
EXIT
Setup menu
During PC mode
Press the MENU button.
Move to choose Setup menu.
Access Setup menu.
Move to choose menu option.
Adjust chosen option or access chosen menu.
Press the EXIT button at any time to exit Setup menu.