Filter
Top Products
17
Tuning
MENU
Press the MENU button.
Move to choose Setup menu.
Access Setup menu.
Move to choose Tuning menu.
Access Tuning menu.
Move to choose Manual tuning.
Access Manual tuning.
Select the programme position to be tuned.
Press repeatedly until required station is found.
When the desired station is found, press the OK button to store.
The programme position will fl ash.
Press the EXIT button at any time to go back to watching TV.
TV
123
456
789
0
OK
EXIT
OK
STR F TV/AV
Manual tuning
Search down/up
Store
Programme down/up
Return
Exit
1
STR F
-
/ + / TV / AV
5. 5MHz
Manual tuning (Front panel)
1
5. 5MHz
-
, + : Search
TV / AV : Move cursor
STR : To store
F : To exit
It is possible to retune individual programme positions:
Manual tuning
Manual tuning (via front panel)
Press the F button until Tuning mode is reached.
Press the –/ or +/ button to access Tuning mode.
Press the F button until Manual tuning is reached.
Press the –/ or +/ button to access Manual tuning.
Press the TV/AV button to move between Change
programme, Search and Change sound system.
Press the –/ or +/ button to change programme position
or start search.
When the desired station is found, press the STR button
to store.
The programme position will fl ash.
Repeat above procedure to tune additional programme
positions.
Press the F button at any time to exit the Tuning menu.
It is also possible to use the control panel buttons on the front of the TV to tune individual programme positions:
Notes:
• If a clear picture cannot be obtained even when a Broadcast or AV signal is received, refer to the Colour system
selection on page 15.
•
After the Manual tuning is fi nished, press the Programme Number up button to confi rm the tuning condition for each
Programme Numbers. If some Programme Numbers are unused, it is possible to skip such Programme Numbers.
Please refer to the Skip function on page 15.
• When using a VCR without video and audio input / output terminals, it is convenient to connect the aerial cable
as indicated in the instruction manual of VCR and to set the designated channel to Programme No.“0”. In that
case, perform
Manual tuning
after setting the Colour system and Sound system in advance. Further, in multi-
system VCR, it is more convenient to set the designated channel to several Programme Numbers.