Filter
Top Products
7
Cable binding instructions
How to fi x:
How to release:
Fix by pushing in
till a clicking sound
is heard.
Pull down while
drawing the
knob.
For using the pedestal
Attach the bands.
Insert the spigot on the two bands into the pedestal.
Connect cables.
Example of “connection cable routing”
Band
Binding strap
Mains Lead
Clamp
Fastening band
Fastening
Loosening
To tighten.
Pull off.
Keep the knob pressed.
Clamp
How to open the front cover
Raise the lower part of the door
marked “PULL”.
Band
Open Close
Removal
Fitting
1. Insert the claws (at 2 points) at the
bottom end.
2. Push until it clicks.
1. Push down hooks and pull the
cover slightly towards yourself to
disengage the claws (at 2 points).
2. Slowly pull out in the downward
direction.
Cable cover Mains Lead
Clamper
Note:
To avoid interference appearing on the screen, do not bundle the RF cable and mains lead together.