Filter
Top Products
9
Connections
TV
123
456
789
0
OK
It is possible to connect a variety of additional equipment to this TV. The following pages detail how to connect external
equipment to the front and rear of the TV.
Once your equipment is connected, use the following procedure to view the input:
Press the TV/AV button.
Whilst the on screen selector keys are displayed, select the page by
pressing the Red or Blue button and then press coloured buttons to
select the AV source you wish to view.
Red button : AV1 Audio, Video, S Video terminals / Back page
Green button : AV2 Audio, Video, Component terminals /
AV4 Audio, Video, Component terminals
Yellow button : AV3 Audio, Video, S Video terminals /
PC terminal
Blue button : Next page / HDMI terminal
The on screen selector keys will disappear after a few seconds. If you
want to select an input when the keys are not shown, press any one of
the coloured buttons and the keys will reappear.
TV/AV
Notes:
• You can also select an AV source using the TV/AV button on the front
panel of the TV.
Press the TV/AV button repeatedly until you reach the AV source you
wish to view.
• When a Monaural VCR is used, connect the Monaural Audio cable to
the AUDIO L terminal.
• Additional equipment and cables shown are not supplied with this
TV set.
• If the external devices have the aspect adjustment, set to 16:9.
AV1 AV2 AV3
AV1
VIDEO
OUT
S VIDEO
OUT
AUDIO
OUT
R
L
AUDIO
/MONO
AV3 IN
S VIDEO
VIDEO
Notes:
• The volume level of the headphones can be adjusted by selecting “Headphone volume” from the Sound menu.
• Additional equipment and cables shown are not supplied with this TV set.
(Optional)
(M3 plug)
How to connect the Headphones / AV3 S Video Input terminals
Connect the S VIDEO or VIDEO terminal.
AUDIO
VIDEO
S VIDEO
Red Blue
Example of input signal source
VCR
S VIDEO VCR
DVD PLAYER
CAMCORDER
S VIDEO 4 pin terminal
Chrominance in
Chrominance earth
Luminance in
Luminance earth