Filter
Top Products
Cable Connection
Follow this diagram when connecting your television to a VCR only.
Use either the S-Video or CONNECTIONS ON BACK OF TV
the Video connection. _ G G
SPUT ANT2
.L
Less than
4" (10cm)
f
VCR
core
(large size)
(supplied)
CABLES NOT SUPPLIED
Note: The remote control must be programmed with supplied codes to operate the VCR (see page 59, 60).
Viewing a television program
Viewing a video
_, Procedure ,__
Option A
1. Press theTV/VlDEO buttononthe remote controlto selectthevideo input(VIDEO 1,VIDEO2, etc.) connectedto yourVCR.
2. Begin the video.
Option B
1. Select ANT2 in the SET UP menu.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Begin the video.
Recording a television program
..... Procedure ...............................................................................................................................................................
Option A (Recording and viewing the same program)
1. Select ANT2 in the SET UP menu.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you would like to record.
4. Begin recording.
Option B (Recording one program while viewing another program)
1. Select ANT1 in the SET UP menu.
2. Press theTV/VlDEO buttononthe remote controlto selectthevideo input(VIDEO 1,VIDEO2, etc.)connectedto yourVCR.
3. Using the VCR, tune to the television program you would like to record.
4. Begin recording.
5. Press the TV/VlDEO button on the remote control to switch back to TV mode.
6. Tune the television to the program you would like to view.
14