Panasonic TH-50PX20 Flat Panel Television User Manual


 
Cable Connection
This television iscapable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner set-top-box (STB). In
order to view DTV programming, the STB must be connected to the component video inputs (Y, PB, PR) of the television.
A DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.
Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD Player to the back of your TV.
DTV INPUT TERMINALS ON BACK OF TV
Note:
There are 2 sets ofthree video inputs, Y, PB, and PR. Separated component color inputs provide luminance and color
separation. Furthermore, the L (left) and R (right) audio inputs must be used.
To listen through a separate stereo system, connect an
external audio amplifier TO AUDIO AMP outputs on back
of television.
To use the television audio and video with optional
equipment, connect the PROG OUT and TO AUDIO AMP
connections on the back of the television.
Note: TO AUDIO AMP terminals cannot be connected
directly to external speakers.
Audio Adjustments
_ Procedure _,_,__o_,o
1. Select SPEAKERS ON located in the onscreen
AUDIO menu.
2. Set amplifier volume to minimum.
3. Adjust television volume to desired level.
4. Adjust amplifier volume to match the television.
5. Select SPEAKERS OFF & VARIABLE AUDIO OUT
from AUDIO menu.
6. Volume, mute, bass, treble and balance are now
controlled through the television.
Select SPEAKERS OFF & FIXED AUDIO OUT to control
audio functions through the external amplifier.
_ Procedure __'_,_,
1. Connect optional equipment to PROG OUT and TO
AUDIO AMP terminals.
2. PROG OUT terminal display isthe same as onscreen
display.
See optional equipment manual for further instructions for
recording and monitoring.
External Amplifier
CONNECTIONS ON BACK OF TV
VCR
OR
MONITOR
16