Filter
Top Products
16
How to use Menu Functions (continued)
Menu Item Adjustment / Configurations
Sound menu
Balance Adjusts volume level of right and left speakers
Headphone volume Adjusts the volume level of the headphones
Surround Gives a greater spatial effect by using dynamic enhancer (Off / On)
Switching is also possible by SURROUND button on the remote
control.
HDMI1 input Chooses according to the signal when HDMI is connected (Auto /
Digital / Analogue)
HDMI2 terminal is for digital signal only.
Reset to Default Press the OK button to reset the present Sound Menu to the default
settings.
Setup menu
VIERA Link VIERA Link function (Off / On) (page 19)
Teletext Teletext display mode (FASTEXT / List)
Off timer
Sets the time the unit automatically turns Off (Off / 15 / 30 / 45 / 60 /
75 / 90) (minutes)
Child lock
Child lock can be set for each channel and each AV mode
Image and sound are not available during Child lock On (Black screen
will appear)
Select the channel or AV mode you want to lock and set this function.
Blue back
Blue back display (Off / On)
On: Blue back display when there are no signals
Off: Blue back display off
VCR/GAME
Reproduction of irregular signals, such as certain TV games and rental
video tapes, may be improved. (Off / On)
Tuning menu Edits or sets channels (page 17)
Colour system
Displayed during AV mode. If a clear picture with current colours
cannot be obtained when a Broadcast or AV signal is received, this
function is used. (Auto / PAL / SECAM / NTSC 4.43 / NTSC 3.58)
PAL, SECAM and NTSC 3.58 are different colour signal broadcast
transmission systems applicable to different countries. NTSC 4.43
is a trick playback mode used in special VCRs to playback NTSC
recorded video tapes through PAL television equipment.
Colour matrix
Displayed during AV mode. Available only with 480p or 576p input
signals in a natural colour from digital equipment connected to AV2
Component terminals.
Select SD or HD to adjust suitable colour parameters for SD (Standard
definition) or HD (High definition)
SD: Input signal is a normal TV system.
HD: Input signal is a High-Definition system.
Viewing
environment
Set the appropriate picture mode based on viewing environment.
Home: Picture mode is set as “Standard” (for optimal picture/power
consumption for home viewing).
Shop: Picture mode is set as “Dynamic” (for in-store display).
TX-26LE8A_0091_EN1.indd 16TX-26LE8A_0091_EN1.indd 16 7/16/08 2:21:40 PM7/16/08 2:21:40 PM