Filter
Top Products
17
The current channel settings can be changed according to your needs and reception conditions.
Set manually
Manual tuning
To freely change settings after Auto setup
1 Select the programme number and search through the channel
CH 2
1
Manual tuning
Programme number
Channel
The programme
number blinks
select programme
search
2 Store
3 Repeat 1 - 2
If a VCR is
connected with
only the RF cable,
select programme
number “0”.
1
(Press until “Tuning mode” appears)
2
or (Access Tuning menu)
3
(Press until “Manual tuning” is reached)
4
or (Access Manual tuning)
5
(Programme, Channel (select), Sound
system)
6
or (Change programme or start
searching channels)
7
(Store)
8 5 - 7 (Repeat)
To return to TV
4. 5MHz
CH10
10
Manual tuning
-
, + : Search
TV / AV : Move cursor
STR : To store
F : To exit
Programme number
(Blinks)
Channel number
(Blinks)
Sound system
(Blinks)
Edit
Sound system
Allows you to change the sound system used for a programme channel.
(4.5MHz / 5.5MHz / 6.0MHz / 6.5MHz)
Select the channel you want to adjust Set this function
Edit
Colour system
Lets you select the correct transmission standard for the transmission signal being
received (Auto / PAL / SECAM / NTSC 4.43 / NTSC 3.58)
Select the channel you want to adjust
Set this function
Normally, select “Auto”
Small adjustment
Fine tuning
For the small adjustments to the tuning of an individual channel (useful for
example when weather conditions are affecting reception quality of a programme)
Select the channel you want to adjust
Set this function
To cancel Fine tuning, tune again by Manual tuning
Skip the
programme
Skip
For skipping the programme numbers on which no TV stations are tuned
Select the programme numbers you want to skip
Set “Skip” to “On”
For Manual tuning using the buttons on the unit
Editing and Setting Channels
STR
F
+
V
V
VVAT
TX-26LE8A_0091_EN1.indd 17TX-26LE8A_0091_EN1.indd 17 7/16/08 2:21:41 PM7/16/08 2:21:41 PM