Filter
Top Products
10 C4655M (2/11)
PTZ CONTROL
The PTZ control is available for cameras that support PTZ functions using Pelco C, Pelco P, and Pelco D protocols. It is also available for supported
third-party dome cameras.
NOTE: When operating third-party cameras, the PTZ control supports the up, down, left, right, zoom in, and zoom out functions.
Figure 3. PTZ Control
Exit: Closes the PTZ control.
Move: Pans and tilts the camera in the direction of the selected arrow.
Speed: Selects the PTZ speed.
ZOOM: Zooms the camera in and out.
FOCUS: Adjusts the camera focus.
IRIS: Opens and closes the camera iris.
PRESET NUMBER: Displays the preset number.
Keypad: Use the numeric keypad to enter presets or pattern numbers.
PRESET: Performs two functions:
• Preset programming mode: Stores the preset in the selected memory location.
• PTZ mode:Activates a preset.
PATTERN: Performs two functions:
• Pattern programming mode: Stores the pattern in the selected memory location.
• PTZ mode:Activates a pattern.
SET: Performs two functions:
• Enters PTZ configuration mode.
• Exits PTZ configuration mode.
Clear: Deletes a configuration preset, pattern, or tour.
Program: Accesses the camera configuration mode.
Auxiliary: Unsupported at this time.
PRESET
PATTERN
SET
CLR
AUX
PGM