Filter
Top Products
12 C4655M (2/11)
Operation
Figure 5. Camera Page and Partitioning Notification
UNIT STARTUP
To start the unit, on the front panel, press and hold the power button until your hear a beep. After a few seconds, the unit’s application
window will appear.
LOGGING ON AND LOGGING OFF
You must log on to the unit with a valid user name and password to operate the HVR. User names and passwords are case sensitive. By default,
the unit includes one administrator logon account; both the default user name and password are admin.
NOTE: When you log on for the first time, the system does not automatically prompt you to change the default administrator password. Anyone
who knows the administrator user name and the default password can access the unit; therefore, Pelco recommends that you change the system
administrator password and store it in a secure location.
Passwords must be from four to eight characters in length.
To log on to the unit:
1. On the toolbar, click Login .
2. Type the password using the on-screen keyboard.
3. Click OK. The system logs you on and the Login icon turns blue.
4. To log off from the unit, click Login . The system logs you off and the Login icon turns black.
WARNING: Before you use the unit to record video, refer to Figure 5 and read the HDD partition notification.