Filter
Top Products
36 C2629M-E (7/09)
6. Proceed to the steps for setting up DHCP or Static IP addressing in the following sections.
Figure 28. Network Setup Page: Software Configuration
DHCP SETUP
Your network must support DHCP, and an active DHCP server must be present for dynamic addressing to work. Consult your network
administrator for more information.
To configure the HVR to acquire a dynamic IP address through DHCP:
1. Click .
2. Click . The Network page is displayed.
3. Click the check box labeled Obtain An IP Address Automatically (DHCP).
4. Click Apply.
Figure 29. DHCP Setup