Filter
Top Products
C2629M-E (7/09) 9
Additional Warnings
• Read and keep all instructions, including the Important Safety Instructions that were supplied with your HVR.
• When using the networking capabilities of the DX8100, Pelco recommends that each DX8100 Series HVR be connected to a secure, private
network. Do not directly connect your HVR to a public network such as the Internet.
CAUTION: The recorder should be installed in an air conditioned room where the temperature is maintained between
50° and 90°F (10° and 35°C) with relative humidity not to exceed 80%, noncondensing.
WARNING:
• When using the networking capabilities of the DX8100, you should connect each DX8100 Series HVR to a secure, private network.
Do not directly connect your HVR to a public network such as the Internet.
• All operating system files, applications, and utilities necessary to operate the DX8100 have been preinstalled on the unit. Do not
install or use any software, including antivirus utilities, other than those installed at the factory.
• Do not install any additional hardware on the DX8100 Series HVR other than those devices listed in the documentation accompanying
the unit. Do not remove, replace, or change any existing hardware without first consulting Pelco Product Support or an authorized
Pelco service center.