Filter
Top Products
C2629M-E (7/09) 67
Setting Up a RS-232 ATM/POS Device Configuration
This section describes how to set up a RS-232 ATM/POS device configuration. Use the RS-232 ATM/POS device configuration to record
searchable ATM/POS data that is synchronized with recorded video. In this configuration, the camera is connected directly to the DX8100 camera
input. The ATM/POS data is routed through the VSI-PRO to the DX8100 RS-232 communications port. ATM/POS output is recorded by the DX8100
as data. Once recorded, the ATM/POS data is searchable and can be displayed synchronously with the recorded transaction video.
Figure 70 illustrates a RS-232 ATM/POS device configuration. One or two ATM/POS devices can be connected to the DX8100. One camera is
shown, but multiple cameras can be assigned to monitor the ATM/POS event from different physical positions. For specific details about the
DX8100 back panel, refer to Figure 11 on page 24.
Figure 70. RS-232 ATM/POS Device Configuration
Table J describes the items required for the RS-232 ATM/POS device configuration.
Table J. Single RS-232 ATM/POS Device Configuration
Item Part Description
ì
Camera The designated camera positioned to monitor the ATM/POS event. One or more cameras can be configured to
respond to an ATM/POS event.
î Video cable A user-supplied cable that connects the camera to the DX8100 video input.
ï= VSI-PRO AVE VSI-PRO ATM/POS interface.
ñ
Data cable AVE triport cable used to connect the ATM/POS device to the VSI-PRO and the VSI-PRO to the DX8100 RS-232
COM1 or COM2 port.
ó DX8100 server The DX8100 HVR.
r
ATM/POS device The ATM/POS device.
ᕢ ᕤ
ᕡ
ᕣ
ᕥ
ᕦ