Filter
Top Products
70 C2629M-E (7/09)
Figure 72 illustrates a multiple RS-422 ATM/POS device configuration.
Figure 72. Multiple ATM/POS Device Configuration
Table L describes the items required for the multiple ATM/POS device configuration.
Table L. Multiple ATM/POS Device Configuration
Item Part Description
ì
Camera The designated cameras positioned to monitor the ATM/POS event. One or more cameras can be configured
to respond to an ATM/POS event.
î Video cable A user-supplied cable that connects the cameras to the DX8100 video input.
ï VSI-PRO AVE VSI-PRO ATM/POS interface.
ñ Triport cable AVE triport cable used to connect the ATM/POS device to the VSI-PRO and the VSI-PRO to the PV140.
ó DX8100 server The DX8100 HVR.
r ATM/POS device The ATM/POS device.
s PV140 A RS-232 to RS-422 converter that provides a bidirectional electrical interface between RS-232 and RS-422
data ports.
t
Data cable User-supplied RJ-45 cable that connects the PV140 to Port 1 to 4 of the DX8100 HVR. The cable is constructed
with a 2-wire pigtail on one end and an RJ-45 plug on the other. For information about the
RJ-45 plug wiring, refer to Figure 11 on page 24.