Filter
Top Products
Pelco Manual C671M (1/01) 23
PROGRAMMING
GENERAL PROGRAMMING INSTRUCTIONS
The following is a universal procedure that shows how programming is done on the VCR.
Use the JOG dial to select items, turn the SHUTTLE ring to the right to enter, and
turn the SHUTTLE ring to the left to exit.
1. Press the MENU button. The Main menu appears.
2. Turn the JOG dial to select the desired item.
•Turn right to move the cursor downward.
•Turn left to move the cursor upward.
3. Turn the SHUTTLE ring right. The desired item is selected and the menu appears.
4. Turn the JOG dial left or right to select an item.
5. Turn the SHUTTLE ring right. The item flashes.
6. Turn the JOG dial left or right to change the setting.
7. Turn the SHUTTLE ring right to enter.
8. Press the MENU button. The day and present time display appears.
LANGUAGE SELECTION MENU
The Language menu appears on the screen:
• When you press the MENU button when the VCR is turned on the first time after it is
purchased
• When you press the RESET button during use
Remember: After the first time, the only way to access the Language menu is to press
the RESET button on the rear panel with a pointed object. Doing so will erase your
custom programming and return the unit to factory default settings. Then follow steps
1-4 below.
The menu offers three languages: English (default), French (Français) and Spanish
(Español). To set the language:
1. Press the MENU button. The Language menu appears.
2. Turn the JOG dial to select the desired language.
3. Turn the SHUTTLE ring right. The Main menu appears in the selected language.
4. Press the MENU button to exit.
ENGLISH
FRANÇAIS
ESPAÑOL
Use JOG to select,
and ENTER.
00257
Figure 11. Language
Menu