Filter
Top Products
Pelco Manual C671M (1/01) 43
ALARM LIST
When alarm recordings begin, the start times are stored in memory so you can confirm
when they occurred. Up to eight alarm recording start times can be stored in memory. If
there are more, the first and last seven are displayed. A maximum of 9,999 alarm recording
start times will be counted.
VIEWING THE ALARM LIST
1. Press the MENU button. The Main menu appears.
2. Turn the JOG dial to select MAINTENANCE, and then turn the SHUTTLE ring right.
The Maintenance menu appears.
3. Turn the JOG dial to select ALARM LIST, and then turn the SHUTTLE ring right. The
Alarm List appears.
4. Press the MENU button. The day and time display appears.
CLEARING THE ALARM LIST
1. Press the MENU button. The Main menu appears.
2. Turn the JOG dial to select MAINTENANCE, and then turn the SHUTTLE ring right.
The Maintenance menu appears.
3. Turn the JOG dial to select ALARM LIST CLEAR, and then turn the SHUTTLE ring
right.
4. Turn the SHUTTLE ring left to clear the list. The Maintenance menu appears.
5. Press the MENU button.
Once the list is cleared, the alarm recording indicator (ALARM) on the fluorescent display
goes off.
ALL MENU INITIALIZE (RESET)
This feature resets all menus (except timer programs) to their initial settings.
1. Press the MENU button. The Main menu appears.
2. Turn the JOG dial to select MAINTENANCE, and then turn the SHUTTLE ring right.
The Maintenance menu appears.
3. Turn the JOG dial to select ALL MENU INITIALIZE, and then turn the SHUTTLE ring
right. The All Menu Initialize menu appears.
(If you change your mind at this point and want to exit the menu without resetting all
menus, skip to step 5.)
4. Turn the SHUTTLE ring left. All menus (except Timer Program) return to their original
settings.
5. Press the MENU button. The day and time display appears.
00290
<ALARM LIST>
0001 01-31’-01 00:00
0002
0003
0004
0005
0006
0007
0008
00291
ALARM LIST CLEAR
Turn the SHUTTLE RING
then ALARM LIST will be
cleared.
00292
ALL MENU INITIALIZE
Turn the SHUTTLE RING
then all MENU will be
initialized.