Filter
Top Products
Mechanical-, Dismantling Instructions, and Service Hints
EN 18 DVD963SA4.
4. Mechanical-, Dismantling Instructions, and Service Hints
4.1 Dismantling Instructions
Figure 4-1 Dismantling Instructions
DISMANTLING INSTRUCTIONS
See exploded view of DVD963SA for item numbers
Mounting
Dismounting
A/V board 1001
Î Remove Double Scart board
(Only for DVD963SA /EU)
Î Remove flex and cable
connections.
Î Remove 4 screws 275
(skt cinch ,optical to back-
plate) and screw 280.
(S-video to back-plate)
Î Release 2 spacers locking.
Î Dismount board.
Front Standby board
Î Remove cable connection.
Î Remove 2 screws 105.
(Board to Front cabinet)
Î Dismount board.
Front Display board 1002
Î Remove cable connections.
Î Remove 8 screws 100.
(Board to Front cabinet)
Î Dismount board.
Front cabinet 002
Î Remove cable connection.
Î Open Tray (see instruction below).
Î Unlock Tray cover 025 and
close tray.
Î Remove 2 screws 120
(Front cabinet to frame)
Î Unlock Front panel from frame by
releasing successively 6 snaps.
(2 on the side and 2 each on the top
and bottom)
Î Place Front panel in front of
the set ( service position ).
TopCover 300
Î Remove 7 screws 305.
Î Lift cover from rear side to
remove.
DVD Module 146
Î Removes flex connections
to A/V board.
Î Open tray (see instruction below).
Î Unlock Tray cover 025.
Î Remove 4 screws 185.
(Loader to bottom frame)
Î Close tray.
Î Lift module up slightly and move
backward to remove.
Power supply unit 1010
Î Remove cable connections.
Î Remove 2 screws 190.
(Board to bottom frame)
Î Release spacer locking.
(Board to bottom frame)
Î Dismount board.
DVD Monoboard
Î Remove flex and cable
connections from DVD
Loader to Monoboard.
Î Remove 4 screws 10 to 13.
(Monoboard to Loader,VAL6011/14)
Î Dismount Monoboard.
Double Scart board 1003
(Only for DVD963SA /EU)
Î Removes flex connection to
conn 1300 on scart board.
Î Remove 4 screws 290.
(scart to back-plate)
Î Dismount board.
P-scan board 1004
Î Removes flex connection.
Î Remove 2 screws 275
(skt cinch to back-plate) and
screw 261 (board to Pscan
bracket)
Î Dismount board
CL 26532105_002.eps
290802
Manually opening of tray
When it is not possible to open the tray with the EJECT button,
the tray can be manually opened.
When no disc is loaded, unlock the tray by moving the slide from left
to right and pull tray outwards.
When a disc is loaded, unlock the tray by pushing the slide inwards with
a screwdriver and pull tray outwards.
Remove 4 screws to remove loader.