Filter
Top Products
33
Tuner info box
This box appears in the bottom left corner of the TV screen. It displays the current antenna
signal, the TV channel, and the channel name of the program you just selected.
a
Current channel / selected device
b
No Signal
TV channel is not available or reception to too weak / Device is not
connected or is turned off
c
Copyprotected signal
'Live picture' in the 'Tuner information
box'
Instead of the information about the aerial signal or the TV channel, you can watch the picture
of the selected TV channel or the signal on the input socket.
1
In the system menu (button SYSTEM-MENU ) select the
symbol '
w
' and confirm with C
2
In the line 'Live source view' select 'On' to view this picture
or 'Off' to switch this picture off.
3
End with OK and then SYSTEM-MENU .
Timer info box
This box is located above the tuner info box. When a recording is programmed (timer), it shows
the time symbol and the start time or the date of the first programmed recording.
When no timer is programmed, the current time will be displayed.
This box is not displayed during disc playback or recording. However, you can access it duriong
an OTR recording by pressing SYSTEM-MENU .
f
Timer set for day shown or time shown (if set for today).
g
OTR recording will run until displayed stop time
h
Current time
No recording (timer) programmed
ENGLISH
Information on the TV screen