Filter
Top Products
64
Changing the media settings
You can adjust various settings for a DVD+RW/+R or a memory card. If a CD-R/RW is loaded
no changes can be made, because this media cannot be recorded by the DVD recorder
1
Press PHOTO on the remote control. The 'Media menu'
screen will appear.
2
Use B or A to select the medium you want to process (disc
or memory card). If you did not insert the corresponding medium
(disc or memory card), a warning sign will appear above the
symbol on the left hand side of the screen.
3
Press C .
4
Select the line 'Media settings' and confirm with OK .
'Media name'
The name of the media will be created by the digital camera.
'Media protected'
The write protection of the media can be switched on or off.
You can use this function only if the write protection can be switched off by a software. You can
not select this line if your memory card was equipped with a mechanically switch.
'Prepare media'
The DVD+RW/+R will be prepared for the data transfer. Read further information in the section
'Preparing a DVD+RW/+R'.
'Finalize disc'
You can select this line only if a 'not finalized' DVD+R is loaded.
If you store pictures on a DVD+R, you have to finalize the disc to play it on a DVD-player.
Once this process is complete, no further changes can be made.
'Erase media'
With these setting all data (rolls and albums) can be erased on a recordable media (DVD+RW
or memory card). This procedure cannot be reversed
The 'Digital Photo Manager'