Filter
Top Products
87
How to change or delete a programmed
recording (TIMER)
1
Switch on the TV. If required, select the channel number for the
DVD Recorder (channel 3 or 4).
2
With the Recorder on, press TIMER s on the remote control.
The programming method selected last is marked.
3
Select 'Timer List' using B or A and confirm with C .
Timer
Timer List
Date
01/22
--/--
Ch.
01
-----
Start
04:25PM
--:--
End
06:05PM
--:--
Rec
Mode
M2
---
Total record time: 01:40
To change
Press ›
To exit
Press TIMER
4
Select the programmed recording (TIMER) you want to check,
change, or delete with B or A .
Delete programmed recording
1 Press the CLEAR button.
2 Confirm with OK .'Timer Cleared' will briefly appear on the TV
screen.
'--' appears rather than the displayed values
3 To end, press TIMER s .
Tip
5
Press C .
Select the entry field with D or C .
If required, change the information with A , B or the number
buttons 0..9 .
6
In 'Date', you first enter the month and then the date.
7
Confirm with OK .
8
To end, press TIMER s .
9
Switch off with STANDBY m .
ENGLISH
Programming a recording (TIMER)